I will be upgrading to 11 tonight, but in general, make sure you read the notes in the .zip. Are you Mac or PC?
Thanks MyGuitarabuse!
The only difference I had ( I was using an Audiobox USB on a PC) was the order of steps. I had to do steps 5 and 6 before going to "Awaiting File".
This worked for me:
1. Download the firmware to a folder and unzip it
2. Turn on AXE-FX and connect to AXE-EDITOR (via your midi device to your MAC/PC)
3. Click on utility on the AXE-FX and go to FIRMWARE (using the PAGE buttons)
4. Click SETTINGS on the AXE-EDITOR and choose "firmware update"
5. Locate your saved firmware file on your PC/MAC and click OK and you should be in business
6. Press ENTER on the AXE-FX (should now say "awaiting file")
7. Start download
Thanks MyGuitarabuse!
The only difference I had ( I was using an Audiobox USB on a PC) was the order of steps. I had to do steps 5 and 6 before going to "Awaiting File".
This worked for me:
1. Download the firmware to a folder and unzip it
2. Turn on AXE-FX and connect to AXE-EDITOR (via your midi device to your MAC/PC)
3. Click on utility on the AXE-FX and go to FIRMWARE (using the PAGE buttons)
4. Click SETTINGS on the AXE-EDITOR and choose "firmware update"
5. Locate your saved firmware file on your PC/MAC and click OK and you should be in business
6. Press ENTER on the AXE-FX (should now say "awaiting file")
7. Start download
Use sysEx Librarian
I missed that last step "Update Presets" it's my first firmware update. What did I miss by not doing that? and when I do it, does it replace all my presets and I have to reload my own back in, or does it leave them alone?
Thanks