paulmapp8306
Fractal Fanatic
So - From Rocktron (very quick reply) heres how to do it.
Press 2nd
Press #4 (control)
press #7 (inc) 4 times - C CH is displayed (for Control Change)
Press #9 to page over
This then displays CH1 (Midi Channel 1), N0 (for control Number 0 - leave this as 0) and V0 (value=0) - so bank A on the Axe
Use #7 to increment V to whatever bank you need. (v=1 for Bank B, v=2 for bank C)
hit 2nd to exit.
Thats it done. The all access no always addresses bank you have selected unless you tell it otherwise.!!
It can be programmed into a patch change or on an IA switch.
Personally I have programmed V=2 as part of Patch 1. When I turn the system on, I hit patch 1 and everything is now addressing Bank C on the Axe. If you needed various banks, just program the control change while the preset you want is selected e.g. If you want patch 3 to be patch 3 in Bank B, Select Patch 3 on teh All Access then follow the process, making V=1. Whenever you press 3 it will address Bank B. HOWEVER it will always address Bank B until told otherwise. If you use all banks, you need to program the Control Change in EVERY Patch (not hard though). If like me you just want to access Bank C (as its unpopulated in teh Standard) then it only needs doing once.
Very Easy - and it works. Again though, why arnt the Manuals clear on these things?
I now have my user Bank Midi Switchable, without disturbing the Presets.
Press 2nd
Press #4 (control)
press #7 (inc) 4 times - C CH is displayed (for Control Change)
Press #9 to page over
This then displays CH1 (Midi Channel 1), N0 (for control Number 0 - leave this as 0) and V0 (value=0) - so bank A on the Axe
Use #7 to increment V to whatever bank you need. (v=1 for Bank B, v=2 for bank C)
hit 2nd to exit.
Thats it done. The all access no always addresses bank you have selected unless you tell it otherwise.!!
It can be programmed into a patch change or on an IA switch.
Personally I have programmed V=2 as part of Patch 1. When I turn the system on, I hit patch 1 and everything is now addressing Bank C on the Axe. If you needed various banks, just program the control change while the preset you want is selected e.g. If you want patch 3 to be patch 3 in Bank B, Select Patch 3 on teh All Access then follow the process, making V=1. Whenever you press 3 it will address Bank B. HOWEVER it will always address Bank B until told otherwise. If you use all banks, you need to program the Control Change in EVERY Patch (not hard though). If like me you just want to access Bank C (as its unpopulated in teh Standard) then it only needs doing once.
Very Easy - and it works. Again though, why arnt the Manuals clear on these things?
I now have my user Bank Midi Switchable, without disturbing the Presets.