https://www.fractalaudio.com/downloads/firmware-presets/axe-fx-3/25p0/axefxiii_dsp_rel_25p00.zip
Updated Axe-Edit is here:
https://www.fractalaudio.com/axe-fx-iii-edit/
25.00
New “Cygnus X-3” amp modeling:
Added “Class-A 30W Brilliant” Amp model.
Added “Kill Dry” control to Delay, Multitap Delay, Pitch, Plex and Reverb blocks. When set to ON the dry signal is muted. This simplifies routing these blocks in parallel. When using these blocks in parallel the user can turn Kill Dry on and set the wet level using the Mix control, leaving the Level control at 0dB. This also has the advantage that the wet level is controlled by the global Reverb/Effects Mix, if desired.
Improved Input block Noise Gate.
Improved Classic Expander and Modern Expander types in Gate block.
Fixed wrong Miller capacitance value in Deluxe Verb Vibrato, Double Verb Vibrato, Super Verb Vibrato and all Vibrato Verb models.
Fixed wrong FX loop recovery gain in Suhr Badger models.
Fixed global settings not recalled if MIDI data is present on the MIDI In jack during bootup.
Fixed wrong Overdrive Volume taper in ODS-100 HRM, ODS-100 Ford and Bludojai Lead amp models. Existing presets should be auditioned and adjusted as necessary.
Various other fixes and improvements.
Updated Axe-Edit is here:
https://www.fractalaudio.com/axe-fx-iii-edit/
Axe-Fx III Firmware Release Notes
25.00
New “Cygnus X-3” amp modeling:
- Improved preamp algorithms.
- Improved power amp algorithms.
- Improved output transformer loss modeling.
- Improved preamp supply voltage modeling.
- Nearly all amp models have been “remastered” as a result of new measurement techniques and analytical methods.
- Preamp Low Cut Freq
- Preamp Hi Cut Freq
- Triode1/2 Plate Frequency
- All Cathode Follower parameters
- Preamp Bias
- Preamp Bias Excursion
- PI Bias Excursion
- Power Tube Bias Excursion
- Transformer LF/HF
- Transformer Drive
- Power Tube Grid Bias
- Cathode Resistance
- Cathode Time Constant
- Negative Feedback
- Supply Sag
Added “Class-A 30W Brilliant” Amp model.
Added “Kill Dry” control to Delay, Multitap Delay, Pitch, Plex and Reverb blocks. When set to ON the dry signal is muted. This simplifies routing these blocks in parallel. When using these blocks in parallel the user can turn Kill Dry on and set the wet level using the Mix control, leaving the Level control at 0dB. This also has the advantage that the wet level is controlled by the global Reverb/Effects Mix, if desired.
Improved Input block Noise Gate.
Improved Classic Expander and Modern Expander types in Gate block.
Fixed wrong Miller capacitance value in Deluxe Verb Vibrato, Double Verb Vibrato, Super Verb Vibrato and all Vibrato Verb models.
Fixed wrong FX loop recovery gain in Suhr Badger models.
Fixed global settings not recalled if MIDI data is present on the MIDI In jack during bootup.
Fixed wrong Overdrive Volume taper in ODS-100 HRM, ODS-100 Ford and Bludojai Lead amp models. Existing presets should be auditioned and adjusted as necessary.
Various other fixes and improvements.
Last edited: