Axe-Fx III Firmware 23.04 Release

Thanks :) Will this extra NFB switch on the Amp block change the sound of my existing presets? Do I have to turn it off to keep the current amp sounds?
 
Release notes from 23.03 for those that missed that brief window:

Improved CPU usage.
Added "Nobelium OVD-1” Drive model based on a Nobels ODR-1. The BC (Bass Cut) switch is modeled via the Bass Response control. Set the Bass Response to 1.0 to duplicate the response of the pedal with the Bass Cut switch engaged. Set Bass Response to 5.0 to duplicate response with BC switch disengaged.
Added Sunrise Splendor model based on a JHS Morning Glory.
Added Gauss Drive model based on a Mesa Flux Drive.
Added Brit 800 2203 models.
Renamed Brit 800 to Brit 800 2204 High.
Added Brit 800 2204 Low model.
Added 5153 100W Stealth amp models.
Added USA MKV Green amp model.
Changed default values of Speaker Drive and Speaker Thump to better align with measurements of typical speakers.
Added NFB Compensation switch in Amp block. This defaults to On. Turning it off disables the negative feedback volume compensation at the output of the Amp block.
Fixed LFO2 not working in Chorus block.
Fixed wrong Distortion pot taper in DS1 Distortion models.
Fixed wrong Gain pot taper in Angle Severe models.
Fixed wrong output pad in USA JP IIC+ Green model.
Fixed wrong default tone stack in 1959SLP and Plexi 100W 1970 models.
Fixed EQ graphs in some blocks not updating when resetting the channel.
Fixed Output Configuration being overridden by Copy parameter. I.e., if Output 2 Configuration is set to
Copy L->R but Copy Output 1 is ON then the output would have the same configuration as Output 1
(e.g., Stereo).
Various other fixes and improvements.
 
For those who never check axe edit
just updated for 23.03

Axe-Edit III 1.13.10is now available via auto-update or from our website:

https://www.fractalaudio.com/axe-fx-iii-edit/

RELEASE NOTES

VERSION 1.13.10
DECEMBER 1, 2023

Current Axe-Fx III Firmware Version: 23.03

SYSTEM REQUIREMENTS
  • Mac version requires OS version 10.7 or newer
  • Windows version requires Windows 7 or newer
  • Minimum firmware version 3.02

NEW IN THIS VERSION

* Support for firmware 23.03
o Added DRIVE and AMP layouts.

* Corrected the "Amp 2" tag in the Amp Info bar.
 
I'm glad the updated Axe Edit is out 'cause I've been holding off on the firmware. When I'm playing with new stuff I'm too lazy to do it the hardware way. I'm also glad I declined to go out and be social tonight! Thanks all at Fractal.
 
Experiencing something strange after updating

Output 1 seems to be summing to mono

When I have something hard panned left the digital meter in axe edit is saying its running only hard left, yet the meters on the unit are running both left & right.

Is there a new default behaviour I've missed in the patch notes?
 
mjb234 said:
Experiencing something strange after updating

Output 1 seems to be summing to mono

When I have something hard panned left the digital meter in axe edit is saying its running only hard left, yet the meters on the unit are running both left & right.

Is there a new default behaviour I've missed in the patch notes?
Click to expand...
Located the issue,

I had output 3 on Sum L+R, but this somehow is affecting the output 1 stereo field too
 
mjb234 said:
Experiencing something strange after updating

Output 1 seems to be summing to mono

When I have something hard panned left the digital meter in axe edit is saying its running only hard left, yet the meters on the unit are running both left & right.

Is there a new default behaviour I've missed in the patch notes?
Click to expand...

Verify that Output 1 Mode is set to Stereo
 
mjb234 said:
Experiencing something strange after updating

Output 1 seems to be summing to mono

When I have something hard panned left the digital meter in axe edit is saying its running only hard left, yet the meters on the unit are running both left & right.

Is there a new default behaviour I've missed in the patch notes?
Click to expand...
Setup->I/O->Audio->Output 1 Configuration
 
You must log in or register to reply here.
Back
Top Bottom