guitarcal
Inspired
Hello everyone!
I had some free time this afternoon, so I decided to record a comparison between my PRS HX/DA amp, Hendrix mode, variac’d at 90 watts and the Axe FX II @ v18.12. The goal was to take my normal HX/DA tone and copy with the Axe FX WITHOUT using tone match.
As far as I can tell, the Plexi 50W Jump is the closest in terms of sound, attack, and presence.
I mic’d up the bottom left speaker of my 1970 Marshall Basketweave Cab. The speaker is a 25w Rola Greenback from 1971, model 1511 which is the 55hz cone. The mic was a Shure Beta 57A (very similar to a Shure 57, just a tad fuller sounding) I captured a profile using the Mic + DI method and dialed in the Axe tone as close as possible.
I've attached pictures below of the HX/DA amp settings and the Axe FX II settings. Surprisingly, the settings are actually fairly close to one another...
Both the HX/DA and Plexi 50W are variac’d at 90 watts. The HX/DA is at half volume. I wish I could run at full volume, but this would result in very unhappy neighbors...
I used my 2011 custom shop heavy relic 57 strat (60s Rocketfire Pickups), Boss OD3 pedal (as a clean boost), Walrus Audio Deep 6, Strymon Timeline and Blue Sky for the recording. I ride the volume control to obtain the cleaner / dirtier tones.
I recorded a dry track and reamped through the Axe and PRS amp. Both were recorded using a Focusrite preamp.
Here are the results. The first (Track8Demo) is the amp and second (Track1Demo) is the Axe FX.
I believe I am pretty close to the same tone. I would appreciate any feedback to how I can get closer! Let me know your thoughts!
I had some free time this afternoon, so I decided to record a comparison between my PRS HX/DA amp, Hendrix mode, variac’d at 90 watts and the Axe FX II @ v18.12. The goal was to take my normal HX/DA tone and copy with the Axe FX WITHOUT using tone match.
As far as I can tell, the Plexi 50W Jump is the closest in terms of sound, attack, and presence.
I mic’d up the bottom left speaker of my 1970 Marshall Basketweave Cab. The speaker is a 25w Rola Greenback from 1971, model 1511 which is the 55hz cone. The mic was a Shure Beta 57A (very similar to a Shure 57, just a tad fuller sounding) I captured a profile using the Mic + DI method and dialed in the Axe tone as close as possible.
I've attached pictures below of the HX/DA amp settings and the Axe FX II settings. Surprisingly, the settings are actually fairly close to one another...
Both the HX/DA and Plexi 50W are variac’d at 90 watts. The HX/DA is at half volume. I wish I could run at full volume, but this would result in very unhappy neighbors...
I used my 2011 custom shop heavy relic 57 strat (60s Rocketfire Pickups), Boss OD3 pedal (as a clean boost), Walrus Audio Deep 6, Strymon Timeline and Blue Sky for the recording. I ride the volume control to obtain the cleaner / dirtier tones.
I recorded a dry track and reamped through the Axe and PRS amp. Both were recorded using a Focusrite preamp.
Here are the results. The first (Track8Demo) is the amp and second (Track1Demo) is the Axe FX.
I believe I am pretty close to the same tone. I would appreciate any feedback to how I can get closer! Let me know your thoughts!