Hey there everyone!
New to the digital party here….
I have a stereo line mixer issue
If I connect guitar to preamp, preamp out to this mlc dual stereo line mixer, then that into power amp and cabs… sounds great!
And if I do that same rig, with rack fx… sounds great….
As my goal is to downsize my rack…. My thought is ditch the rack fx and just use the axe fx thru the mixer….
As if I go preamp to axe fx to power amp direct… I hear digital tones I don’t like…
I hope to run axefx thru mixer to still keep my analog tone running thru, and just be able to engage digital fx
BUT…
it seems there’s a phase issue I can’t get rid of when I plug into the mixer with axefx
Sounds hollow enough to be annoying and not feel right….
I’ve checked my I/O and that’s set up right, I even flip the phase there and it goes from bad phase to worse….
On the app, I’ve created the channel correct (I think)…. If I bypass the input (aka take axe out of the loop) sounds normal
But I engage the axe fx, phase comes back….
Anyone know if I can in fact even use the axe fx as a rack fx thru my stereo line mixer?
Any advice would help, again I’m new to this (meaning I’m not fully versed in axe fx so detailed help would help), but I do understand concepts, so I’m not new to the entire wiring and understanding game.
And happy new year everyone! I’m taking the bold leap of incorporating digital into my signal…. Recovered Analog cork sniffer here hahhaha
(Again, if I bypass all axe fx pedal, all set to thru…. It passes phased tone… and I get that’s dry tone going back into the mixer…. So if I engage a delay, I’ll set it to 100% wet…. Which normally sound just pass delay with a normal rack unit…. This can do that, minus this inherent phase sound by just connecting the unit and having it in line)
New to the digital party here….
I have a stereo line mixer issue
If I connect guitar to preamp, preamp out to this mlc dual stereo line mixer, then that into power amp and cabs… sounds great!
And if I do that same rig, with rack fx… sounds great….
As my goal is to downsize my rack…. My thought is ditch the rack fx and just use the axe fx thru the mixer….
As if I go preamp to axe fx to power amp direct… I hear digital tones I don’t like…
I hope to run axefx thru mixer to still keep my analog tone running thru, and just be able to engage digital fx
BUT…
it seems there’s a phase issue I can’t get rid of when I plug into the mixer with axefx
Sounds hollow enough to be annoying and not feel right….
I’ve checked my I/O and that’s set up right, I even flip the phase there and it goes from bad phase to worse….
On the app, I’ve created the channel correct (I think)…. If I bypass the input (aka take axe out of the loop) sounds normal
But I engage the axe fx, phase comes back….
Anyone know if I can in fact even use the axe fx as a rack fx thru my stereo line mixer?
Any advice would help, again I’m new to this (meaning I’m not fully versed in axe fx so detailed help would help), but I do understand concepts, so I’m not new to the entire wiring and understanding game.
And happy new year everyone! I’m taking the bold leap of incorporating digital into my signal…. Recovered Analog cork sniffer here hahhaha
(Again, if I bypass all axe fx pedal, all set to thru…. It passes phased tone… and I get that’s dry tone going back into the mixer…. So if I engage a delay, I’ll set it to 100% wet…. Which normally sound just pass delay with a normal rack unit…. This can do that, minus this inherent phase sound by just connecting the unit and having it in line)