Search results for query: *

  1. Andy G

    Wish Way Huge Red Llama

    The Way Huge Red Llama uses an unbuffered CMOS inverter to produce a warm, fuzzy overdrive sound. I built a clone of it a while back (well before my Axe-Fx days), and it got a fair bit of use. I don't think this is covered by any of the existing drive pedals, although I'm happy to be corrected...
  2. Andy G

    Wish Authentic Darkglass B7K Ultra v2

    So it looks like the B7K Ultra V2 has a loadable Cab Sim IR function - I can't see this being replicated in the drive block. Everything else seems to be covered by the existing tone-sculpting tools in the drive block (although I'm happy to be corrected). Low-cut is equivalent to the Grunt...
  3. Andy G

    Wish Authentic Darkglass B7K Ultra v2

    How do these differ from the version available in the AxeFx at the moment? Are there tone sculpting options that can't be done in the current drive block?
  4. Andy G

    New Community Tool/Resource

    Love what you've done so far in terms of website design. I can see this being a really useful resource once it's fully populated with amps etc. While it might seem harsh given the amount of work you've put into this so far, I can understand the criticisms of those who are raising issues with...
  5. Andy G

    Axe-Fx III Firmware Release Version 16.01 Beta 1 Public Beta

    No worries at all, glad it helped! And yes, definitely a real world problem. We get the amps in their raw glory, warts and all.
  6. Andy G

    Axe-Fx III Firmware Release Version 16.01 Beta 1 Public Beta

    It sounds like ghost notes. Increase the B+ Time Constant in the amp Power Supply tab. You can make them really prominent by turning the B+ Time Constant down low, if that's your thing (I suspect it isn't). https://forum.fractalaudio.com/threads/ghost-notes.126903/
  7. Andy G

    Wish Peavey Invective - Killer Amp!

    Are you talking about the 5150 vs Invective, or 5150 vs 6505? Cliff's post was in response to a 5150 vs 6505 comparison.
  8. Andy G

    Axe-Fx III Firmware Release Version 16.01 Beta 1 Public Beta

    You're right. I didn't notice that in my initial play with it, but yes, you need to really crank everything to get close to unity gain.
  9. Andy G

    Bug? Help debugging Blackglass b7k

    For those watching this thread, the new beta firmware (16.01 beta 1) has an updated (fixed) B7K model. It's sounding good! https://forum.fractalaudio.com/threads/axe-fx-iii-firmware-release-version-16-01-beta-1-public-beta.172736/
  10. Andy G

    Axe-Fx III Firmware Release Version 16.01 Beta 1 Public Beta

    The B7K model sounds really good now, thanks for fixing/updating that. :)
  11. Andy G

    Axe-Fx III Firmware Release Version 16.00 "Cygnus"

    Hardly anyone appreciates Bach these days.
  12. Andy G

    Axe-Fx III vs The real deal tube amp

    Glad it's helped - sounds like you're on the right path! It's funny, I thought I was selecting relatively bright IRs (or at least I skipped through a whole lot of darker IRs). But glad that whatever I picked worked for you. It's so easy to focus on the amps and forget that the IR is equally (if...
  13. Andy G

    Axe-Fx III vs The real deal tube amp

    There's a lot of low end missing in that clip, which might explain why it feels 'forward' and gritty. Playing around to try and get a similar tone I ended up with a Low Cut in the Cab Block at around 330Hz. IR choice is going to be a large part of replicating that clip as well. I could get...
  14. Andy G

    Issues making P90s work with Axe-Fx

    How are you monitoring the Axe-FX? You've got the room level turned up quite high in the cab block, which may be impacting on perceived clarity. IRs will also play a huge role on overall sound - have you experimented with different IRs? I don't have a real Dumble in front of me, so take my...
  15. Andy G

    Issues making P90s work with Axe-Fx

    Are you saying you've figured it out and don't have a problem anymore? That preset sounds fine with my P90-equipped guitar.
  16. Andy G

    Effects to supplement your AxeFX 3?

    I've never felt the need to add anything. There may be some very particular pedals that you find you can't replicate (e.g. some people will use an outboard Digitech Freqout pedal), but on the whole the effects are top-notch. If it's modelled in the Axe-Fx, chances are you'll be very happy with...
  17. Andy G

    Axe-Fx 3 MK3?

    The problem with the II-T was that you only got one sort of power tube. I believe the Axe-Fx III Mark III will have internal robotics that will swap over a bank of power tubes depending on the scene/preset. Modelling can't get realer than that.
  18. Andy G

    The REAL Mesa Boogie Mark IIC++

    No. A pot/knob/dial with the same slope but different end points would be considered to have the same taper.
  19. Andy G

    Axe-FX III Linux stereo in and out simultaneously

    Audio routing in Linux is a mysterious beast, and something I've never been able to fully grok. Very interested to see if there is anyone here who has managed this.
  20. Andy G

    The REAL Mesa Boogie Mark IIC++

    Different tapers implies that you have the same maximum and minimum gain, but the behaviour of the control is different between the model and the real amp as you move between maximum and minimum. So 50% gain on the model may equate to 70% gain on the amp (just making up numbers here, not based...
  21. Andy G

    Axe-Fx III 16.00 Beta 10 "Cygnus" Firmware - Public Beta #7

    Possible Display Bug: Within the amp block, scroll using the "Page >>" button to the Output EQ tab. The name of the amp type is shown in blue in the top left corner of the display. Now scroll one further to 'Dynamics' and "8 BAND VAR Q" is now shown in the top left corner. Scroll back to 'Input...
  22. Andy G

    Home Gym stock thread

    This is my 'home gym' setup that I managed to get built towards the end of last year. Was lucky to be able buy the climbing holds - lots of people building home climbing setups. A bit different to the usual home gym setups, but it keeps me sane.
  23. Andy G

    Axe-Fx III 16.00 Beta 7 "Cygnus" Firmware - Public Beta #4

    Loving the DC-30 EF86 channel. Rich, chimey, crunchy goodness. I mean, it was good before, but this is really nice.
  24. Andy G

    Axe-Fx III 16.00 Beta 7 "Cygnus" Firmware - Public Beta #4

    If this is a bug you're talking about, you're going to have to give a more detailed description.
  25. Andy G

    Open back headphones recommendations?

    I've been very happy with my Beyerdynamic DT880 Pro.
  26. Andy G

    Why does Fractal let Dealers out side the USA Rip users off so much ?

    This thread was specifically about Axe FX III prices in Australia, and I think it's been pretty clearly shown that distributors aren't making huge profits off sales in Australia. Fractal don't go through a retail distributor in the US, hence US customers don't need to pay all the overheads...
  27. Andy G

    Why does Fractal let Dealers out side the USA Rip users off so much ?

    I'm OK with the price of musical gear in Australia. Cheese however - soooo expensive for a good cheese!
  28. Andy G

    What's the Blinking Red Light Under the Fan Mount on the Motherboard of my Axe III MkII?

    As long as it maintains a constant blink, the Axe Fx hasn't gained sentience. If the pattern changes, run...
  29. Andy G

    Why does Fractal let Dealers out side the USA Rip users off so much ?

    Take the non-sale price of the Axe FX III from the Fractal website ($2500USD), adding 5% import duty and then 10% GST on top of that, and that gives you $2887USD, or $3722AUD. Pretty darn close to the $3908AUD that Independent Music are charging for the Axe Fx III in Australia.
  30. Andy G

    Why does Fractal let Dealers out side the USA Rip users off so much ?

    I mean, yes, it's not a 1:1 exchange rate, but we still tend to pay more for musical instruments in Australia. Just the price to pay for being in a country with a relatively small market and with dealers needing to cover shipping and import costs. That aside, when you consider the cost of...
  31. Andy G

    Help With Sudden Noise/Distortion Problem

    From your description, it sounds like some sort of external interference, but it's a bit hard to tell without more info. What happens if you turn the input Noise Gate off? Is it constant background noise rather than the 'chirp like' sound you describe after single notes?
  32. Andy G

    Cygnus Beta - first impressions

    Marshalley, with a hint of Bassman.
  33. Andy G

    Help With Sudden Noise/Distortion Problem

    Can you describe your setup? PC? Any other audio interfaces? Is the problem still there if you unplug the AxeFX from everything else and listen through headphones?
  34. Andy G

    Reamping only reamps effects?

    If your DAW can route audio to USB 7/8, then you can use the dedicated IN USB block to reamp instead of changing input source on the Axe Fx. Currently there is no audio coming through your IN USB block.
  35. Andy G

    Reamping only reamps effects?

    What is your USB 5/6 input level set to? (Setup>I/O>USB/AES) You're getting very, very low input when you're reamping. I don't think there are issues with 'only reamping effects', it's just that the input level is so low that you aren't getting any distortion from the amp.
  36. Andy G

    Bug? Help debugging Blackglass b7k

    The preset you shared looks like it's just the default parameters, with drive at 5. When I knock drive up to 10 I get a decent amount of distortion with a passive P Bass. I also like to knock the low cut down as well (to simulate the 'Grunt' switch). If the drive block is barely distorting at...
  37. Andy G

    Bug? Help debugging Blackglass b7k

    I've just rolled back to an older firmware (12.06) and then back to 15.01, and I'm less sure now. They sound the same. Probably just misremembering things. It might also be the difference between active pickups and passive pickups? I'm using a P Bass, whereas I think a lot of the video demos...
  38. Andy G

    Bug? Help debugging Blackglass b7k

    I've just tried a really basic preset with the B7K drive block (straight into the SV1 model and cab), and I agree, this isn't the behaviour I'd expect. I seem to remember it being a lot nastier and with a whole lot more distortion on tap. I've also tried an existing preset that I made a while...
  39. Andy G

    Axe-Fx III Firmware Release Version 14.05

    I was initially very disappointed with the sound from the Blackglass 7K (on default tone settings). You have to play around with the various controls, but once you do, it sounds pretty good. I think the default settings aren't very representative of the drive model as a whole.
  40. Andy G

    Struggling with Tones!

    That cab supposedly has a frequency response of 80Hz-5kHz, which leaves a whole lot of stuff above 5khz that you won't be hearing until you go direct to FOH. We also don't know whether that cab has a relatively flat response between 80Hz-5kHz - I would be willing to bet that it doesn't. As...
  41. Andy G

    Is it a bad idea to take axe fx with me on a plane?

    Just waiting on an 18V version now... With adapters for each different brand of power tool lithium battery.
  42. Andy G

    Is it a bad idea to take axe fx with me on a plane?

    I'm pretty sure the Axe FX III will run on all standard electrical supplies (110-240v).
  43. Andy G

    Studio monitor for Axe-Fx III?

    Adam A7X.
  44. Andy G

    Can I clone an Overdrive/Distortion effect?

    Nice! There should be plenty of drive models that cover both the treble booster and tube screamer (presuming that's what the Ibanez/Maxon pedals are), at least as a really good starting point. You could set up a preset with a looper and switch between your custom pedals and the Axe Fx III drive...
  45. Andy G

    Can I clone an Overdrive/Distortion effect?

    You can't clone a drive pedal like you are suggesting. What you can do however, is find a drive model that is closest to your custom pedal, tweak this model to get as close as you can, and then do a tone match to get you even closer. Should give you pretty good results. Out of curiosity, what...
  46. Andy G

    Adam Jones Signature Gibson LP

    I think the OP was speculating that this might cost $10k. I don't think there is an official price yet.
  47. Andy G

    Damaging the Axe Fx III by having the rack standing on the side wall?

    No. Just keep it out of the path of potential liquid spills (i.e. water running off the desk).
  48. Andy G

    Axe-Fx III Firmware Release Version 12.10

    I was thinking that the high G sounded slightly flat. But regardless, there are plenty of other amps that do edge-of-breakup without excessive crossover distortion. There is also a lot of background buzz in that recording, and this may contribute to your sense of there being 'excess distortion'.
  49. Andy G

    Stereo Amps vs. Axe-Fx III

    A Porcupine Tree vibe going on there. Really nice stuff.
  50. Andy G

    Bass product roadmap?

    Have a look at Leon Todd's video here - he shows how to use a crossover block to split bass into a clean low signal and a distorted high signal - https://forum.fractalaudio.com/threads/5-minute-tones-distorted-bass.150941/
  51. Andy G

    Matchless DC-30 Sounds Very Dark

    Try it with IRs 26 & 23 from the Legacy bank.
  52. Andy G

    Matchless DC-30 Sounds Very Dark

    Are you talking about the normal channel model or the EF86 channel? I do agree, the EF86 channel does sound darker than I remember my DC30 clone sounding. But with the right choice of IR and the tone control close to 0 (the tone control works in reverse, with values closer to zero corresponding...
  53. Andy G

    Update to Axe-Fx 3, Firmware 12.xx - Problems?

    Shouldn't be an issue. Make sure you do a full backup first, as with any firmware update.
  54. Andy G

    Personal reflection on the Cost today compared to a year ago AXE III

    Ah, I didn't realise you weren't talking about US prices. A few other variables at play with international distributors, such as exchange rate etc, which Fractal doesn't have control over. It is a really tough time for a lot of people, and I really feel for people who are working in those jobs...
  55. Andy G

    Personal reflection on the Cost today compared to a year ago AXE III

    I don't think digital vs analog has much to do with it, except that the digital guitar modeller market is an evolving one, and companies will generally try and remain competitive. This could be through product updates (i.e. firmware), product upgrades/diversification (i.e. FM3) or pricing...
  56. Andy G

    Respect the Low End

    Just bought this pack, absolutely love it so far. Thanks heaps for putting it together, I think these are going to become some of my go-to cabs for getting nice gritty bass tones.
  57. Andy G

    Wish customizable display colors? ASCII symbols, fonts? Themes?

    It's not truly heavy metal unless all your preset names are written in the Black Speech of Mordor. "One rig to rule them all..."
  58. Andy G

    Wish GK bass amp(s)

    Always helpful to include a schematic with a request - 800RB schematic attached.
  59. Andy G

    Axe-Fx III vs The real deal tube amp

    Might be worth starting a new thread dedicated to this question - you're more likely to get useful responses and discussion this way, as it doesn't get lost in the noise.
  60. Andy G

    First 3 days with Axe FX 3, I thought it was the worst sound ever (b/c I didn't read the manual)

    Have you done a full factory reset (if you bought second hand)? How are you listening to it? Choice of monitor/FRFR speaker can have a huge impact.
  61. Andy G

    Axe-Fx III and Headphones

    I have the Beyer DT880 250ohm, and while they're certainly quieter than some other headphones (such as Shure SRH840), they get uncomfortably loud with Output 1 volume anywhere close to full. I wouldn't want to run them at those volumes for more than a few seconds for fear of damaging my hearing...
  62. Andy G

    AFIII If you aren't already sick of the U2 classics...Streets

    Wow, that is excellent work. And such a good preset as well - worked straight out of the box for me with a mahogany-body guitar with P90s, which was a little surprising.
  63. Andy G

    Need help with the Cleans!

    What guitar are you using and when did you last change the strings?
  64. Andy G

    Wish Allow boolean search in Manage Cabs

    Yes, absolutely. Didn't realise there was a separate wish list section for Axe Edit.
  65. Andy G

    Closed I wish Fractal Allows Me to Overwrite All Factory IRs

    I've posted in the Wish List - https://forum.fractalaudio.com/threads/allow-boolean-search-in-manage-cabs.162027/
  66. Andy G

    Wish Allow boolean search in Manage Cabs

    As a way of helping deal with the sometimes overwhelming number of IRs, it would be helpful to be able to combine search terms within Manage Cabs. For example, to find all 4x12 or 2x12 cabs shot with an SM57 you could search for (2x12 OR 4x12) AND 57. (Originally suggested here, but I thought...
  67. Andy G

    Closed I wish Fractal Allows Me to Overwrite All Factory IRs

    While I don't agree that Factory IRs should be overwritable (I think this would cause more issues than it would solve), I do think there could be usability improvements in the IR selection process. The ability to assign a color to each IR is a good start. Ideally I would imagine having a set of...
  68. Andy G

    Closed I wish Fractal Allows Me to Overwrite All Factory IRs

    To be fair, 128 cabs, 4 mics and 4 mic positions would be 2048 IR slots. Still a lot of cabs. Too many to fit in my living room.
  69. Andy G

    AFIII Song with Princeton & Matchless amps

    Lovely work. The Matchless amps have to be some of my favourite within the AXEFX III. Which model are you using here?
  70. Andy G

    FM3 or Line 6 HX Stomp as multi FX

    Sure, FAS doesn't include an ACTUAL tape head and reels in the FM3. So yes, they are plain digital. But so is the Helix. Unless they've managed to squeeze full circuits (tape and all) for a couple of hundred amps and effects into a small floor based unit... What matters is the modelling...
  71. Andy G

    The Axe-Fx 3 works only at 48Khz

    Ah, but you'd need Cliff to model a Tuba Screamer to be able to properly push the front end of the tuba amp. Sadly the AxeFx III is lacking.
  72. Andy G

    Audio interface that works without PC being on?

    Yeah, I was ignoring that particular suggestion. :p Not that I wouldn't like another pair of monitors. Just don't have anywhere to put them. Current monitors are on my desk because there's no floor space available - I share a smallish study space with my partner. It's sounding like an upgrade...
  73. Andy G

    Audio interface that works without PC being on?

    That's quite helpful - looks like the Focusrite 6i6 has this. Might be another option if I can't find a small enough mixer.
  74. Andy G

    Audio interface that works without PC being on?

    Great, silly as it sounds, I hadn't even considered this. If I can find one small enough, I'll do this (desk space is at a premium). Thanks!
  75. Andy G

    Audio interface that works without PC being on?

    Currently running an MBox2 as an audio interface. Got a few issues with it, but my major bugbear is that it requires my computer to be powered on for it to function. I currently have my Axe-Fx III output 1 running into the MBox2, which then feeds a pair of Adam A7X monitors. I occasionally use...
  76. Andy G

    Blind Test #1: Axe-Fx III vs. Real Amp

    Really interesting comparison, thanks Jason. I can tell there's a slight difference between samples (i.e. they're not all the same reamped track), but apart from that couldn't pick which is which. This got me thinking - I think a good A/B test would be with 4-5 samples of each, with different...
  77. Andy G

    Axe-Fx Paid Consulting

    It seems there's another Melbourne in Florida. Got me at first as well...
  78. Andy G

    Wish Wave-Particle Balance Knob at the Amp block advanced parameters

    The best answer.
  79. Andy G

    Axe-Fx III Firmware Version 3.02 Public Beta

    No diodes to choose from under the advanced tab. I take it all back! :oops:
  80. Andy G

    Axe-Fx III Firmware Version 3.02 Public Beta

    That, or dumb luck. I did A/B the RAT model before and after (same preset), but was just playing around with the Muff and happened upon something that sounded much better than I've ever managed before. More than happy to acknowledge that it was just dumb luck. I know the Muff has clipping...
  81. Andy G

    Axe-Fx III Firmware Version 3.02 Public Beta

    Wow, what an update! Only been playing for 15 minutes or so. The new Rat model sounds great, but very different from the old one. Reckon it's time to get some Radiohead happening. Also played a little with the new Big Muff model. Whereas I've struggled previously to get this to work with a...
  82. Andy G

    How do you make single strings sound thicker on clean sounds?

    Just to clarify, are you comparing to a miced, recorded version of your real amps? Or comparing to the amp in the room?
  83. Andy G

    Axe-Fx III Firmware Version 3.00

    Wow, love this! Really excellent work from both of you. What sort of processing did you do on the vocals? It sounded like there was a bit of distortion or something in some parts.
  84. Andy G

    Axe-Fx III Firmware Version 3.00

    There's Cirrocumulus, Cumulonibus, Nimbostratus and Stratocumulus that I think are new in the Reverb block. And the Plex Delay block has a Plex Verb type added.
  85. Andy G

    Is there any need for a tone knob on a guitar?

    This is really interesting! So it sounds like it might be possible to simulate a similar effect in the Axe-Fx, but is probably a lot easier just to throw the tone control back in the guitar.
  86. Andy G

    Is there any need for a tone knob on a guitar?

    My main guitar is currently wired up without a tone control (because who uses that thing anyway?), but I've recently been playing with another guitar that does have a tone control. I have been using the tone control to knock a bit of the high end off at times. Which made me wonder... Is there...
  87. Andy G

    Axe-FX II XL or M2?

    For your uses, there isn't a hugely overwhelming reason to get an XL+ or XL over a Mark II. The XL and XL+ will have a slightly lower noise floor than a Mark II. Plus the extra memory that Chris referred to. I had a Mark II for a while before upgrading to the Axe Fx III. I never felt the need...
  88. Andy G

    DIY Axe-Fx Foot Controller for $50 (Open Project)

    Sorry, my brain obviously wasn't working that day. For some reason I thought the .ino files were a compiled version of the arduino program. Cheers!
  89. Andy G

    DIY Axe-Fx Foot Controller for $50 (Open Project)

    Been following this with interest. Love the DIY look, although I'm surprised it's surviving gigs! Wondering if you have the code up on GitHub or anything like that? I'm starting to put together code for a similar project - arduino based controller for the AxeFx III. Tossing up between LCD vs...
  90. Andy G

    AFIII To All The Pundits

    I think you are misunderstanding how sound waves behave. Sound waves superimpose in a linear fashion. This means that sound waves emitted at time X don't 'interact' with reflections from a previous time Y. The sound you hear at the microphone is the linear sum of sound from time X and...
  91. Andy G

    Best/Worst monitors for use with Axe FX

    Did you see the date on the original post? ;)
  92. Andy G

    seriously considering ditching FRFR speaker

    Yep, perfectly understandable, this sort of gear can be really expensive. And it's sometimes good just to work with what you have. In that case, EQ is your friend. Try a low cut on your patches, see if that helps. You might also have to do some judicious cutting/boosting of particular...
  93. Andy G

    Should I keep bothering with the Axe-Fx II XL+?

    Good to hear! You'll get better and better at dialling in good presets as time goes on. The first presets I made were shocking - I occasionally go back and play them and cringe.
  94. Andy G

    seriously considering ditching FRFR speaker

    If you have the option of trying it with a high quality FRFR speaker, try that first. Depending on where you are, there may even be a fellow forum member who would be willing to help you out. I had a pair of M-Audio BX5 studio monitors for a while, and was never happy with the sound of the...
  95. Andy G

    Sound man needed me to level way down - why?

    Padding is only going to do so much if he's trying to run a hot line level signal into a mic preamp! :eek:
  96. Andy G

    Post Your Axe-Fx III Rigs Here!

    Nice patch panel - did you put that together yourself?
  97. Andy G

    Axe-Fx III in Music Radar

    Some of my absolute favourite bass tones were recorded with a miced cabinet. A lot of Karnivool's 'Sound Awake' album were recorded with an SVT2 and an ampeg cabinet. I think he also used a couple of drive pedals (ODB3?). The song Goliath is a prime example, bass kicks in at 22 seconds or so.
  98. Andy G

    Sound man needed me to level way down - why?

    Setting Out1 to -10 might help. I've had this issue before, and I think it was because they were expecting either a mic level input or something similar. It was also in a church setting, and the back of the mixer wasn't accessible to see what was going on. Who knows. Maybe your Axe-Fx signal...
  99. Andy G

    Help me decide: Axe-Fx III or AX8

    That was my position when I got my Axe-Fx II. And I am now playing more often than I ever was previously. I would recommend the III if you can afford it. Playing at home you don't have to worry about portability, it's got more power, and the amps are ever so slightly better. Plus a built in...
  100. Andy G

    Which IR do you like with the DC30?

    The EF86 channel in the dc30 doesn't have a conventional tonestack, among other differences. I've tried just setting the preamp tube type to EF86 in the Axe-Fx, but it doesn't even get close to the real EF86 channel.
Back
Top Bottom