Search results for query: *

  1. L

    Wish Bigger font for CPU usage

    Hello Please make the font larger for the CPU usage information on the LAYOUT screen for FM9. This is very important information, and it is written in the SMALLEST font possible on the entire screen. Maybe the same font as for the word LAYOUT in the upper left corner would be enough? It seems...
  2. L

    Bug? Change preset state after pres Bank plus/minus is infinite

    For the Presets Layout, you can press the Bank +/- buttons. After pressing these buttons, FM9 enters the Preset Selection mode (all LEDs around the footswitches are blinking, FM9 is waiting for a preset selection or next Bank +/- change). The problem occurs when we change our mind and do not...
  3. L

    Wish Input noise gate parameters for controllers (for disable noise gate work)

    Please add posiblite to control (by controllers, CS etc) Threshold (or Ratio) in Noise gate in Input Block. Now turn off Input Noise Gate is available only by changed channel of Input block, but this make preset "changed" (LED Edited is on). Bypase Input block = mute signal, this way is also...
  4. L

    2203 was worth the wait

    MeToo ;)
  5. L

    External Controller startup issue

    @playmusic - that's how I interpreted your comment - as a polite suggestion, without any ofence. However, it is not always possible to work this way (all my presets have an auto-engange wah block). My workaround - I always after powerOn quickly change the preset twice (right arrow, left arrow)...
  6. L

    External Controller startup issue

    +1 I confirm, I also have this problem. All the presets I use have a wah block and they are all switched via auto-engange. Of course, you can deal with this problem in various ways, but the thread is about trying to solve the problem comprehensively, at the frimware level.
  7. L

    Wish Add Control Switches to Performance Page

    Please add the ability to embed Control Switches on the Performance Page
  8. L

    ControlSwitch and Manuals Controllers to Performance page?

    There is also another way to manage the CS state than footswitches - through the "CS for scenes" page in the Controllers section. There, for individual CSx can be assigned a state for specific scenes. One of the possible states that can be set there is "Last", which allows you to leave a given...
  9. L

    Wish Not (Block Bypasse) state for Performance Page

    Basically, you're right - if you reversed the bypass block illumination on the performance page, it would probably solve the problem. But perhaps in the firmware logic this would be inconsistent with the behavior of the backlight of the other bistable switches. So I don't know, probably no one...
  10. L

    Wish Not (Block Bypasse) state for Performance Page

    Hello It's about adding a switch not (bypass) (i.e. the logical negation function for the state of the block) to the performacne page. What is it about: in almost the entire Fractal ecosystem, running blocks (i.e. those that are not Bypassed) "light up" brightly. This is what happens with the...
  11. L

    ControlSwitch and Manuals Controllers to Performance page?

    I try do this on 6.0 beta and newest Edit and seem not posible for FM9. For AX3 is posible now (for Manual Controles, i dont know how with CS): https://forum.fractalaudio.com/threads/wish-granted-ability-to-map-manual-controls-to-the-perform-pages.201581/ What I missed? Is posible for FM9 or...
  12. L

    FM9 Latency - Around 5ms?

    Hello And what about ControlSwitches or ExternalSwitches? They add latency to preset or no (especially at firmware 6.00 beta). In time of AX8 CS and ES added CPU usage, what its now?
  13. L

    Dyna Cabs...why don't I get it?

    Its preset from AXE FX3? On FM9 we can't use more that 2 DC thesame time in one CabBlock....
  14. L

    Dyna Cabs...why don't I get it?

    Dear Cam Heiliger - it's about sound. Allways (and only). ;):grinning:
  15. L

    FM9 sounds bad on startup

    To me it happens yesterday first time. Wah block was in signal path, but was bypassed (I have one button from 9 just for the color LED that shows my status of wah block). Sound was complety crap in did and very loud (louder that normal level of this preset). Firmware version - current 5.00 beta...
  16. L

    Dyna Cabs...why don't I get it?

    After playing with DC for a more time (many houers) , it should be said that quite good sounds can be set with DC for clean or crunch sounds. However, for lead/high gain sounds, it's hard to get something comparable to god IRs. In my opinion, for DC the lead sounds are "thin", the bass is...
  17. L

    Dyna Cabs...why don't I get it?

    uffffff, thanks for being brave enough to write this, I am not alone in this "darkness".... ;)
  18. L

    FM9 Firmware Version 5.00 public beta (1)

    Sorry for (mayby) stuip question - why there are no more Proximity knob for Dyna-Cab?
  19. L

    IRs York Audio Master Thread - Newest Cab Pack: KW 412 M25-SH

    @YorkAudio, does this newest IR pack (KW 412 M25-SH) have anything to do with this file?: https://www.fractalaudio.com/gift-of-tone/#12
  20. L

    Ask For a sound and I do it for you

    Hello Marco Do you provide such a service: I am sending you the recorded sound of my clean, unprocessed guitar. A few minutes of my playing on my guitar, sounds softer, sounds played harder, chord playing, solo. All recorded by Fractal product (FM9) guitar > input > USB_OUT and recorded in DAW...
  21. L

    FM9 John Mayer Where The Light Is tone

    "I have a tutorial ready for tomorrow so you can dial it in!" I am waitng patiently ;)
  22. L

    FM9 Firmware Version 4.01 public beta 2

    Posible bug no 2 After Save to new preset number command in FM9-Edit on screen on unit preset is displayed blended (like unopened). Screen blink like allwas after pushinfg button Enter on FM9
  23. L

    FM9 Firmware Version 4.01 public beta 2

    Posible bug no1 Small problem: changing drive to Bosom Boost make pop sound (0:06) Bigger problem: for Bosom Boost knob Mid from tab Basic is conected to High Mid from tab Tone (inplace MID?).
  24. L

    AFIII Gilmour is more fun with a Dumble (preset included)

    But soundtrack in video is recorded separetly, right? Video and sound are from different record sessions, correct?
  25. L

    Gift of Tone #12 - JUSTIN YORK

    Hello Do you anticipate IR-pack in this configuration? Or: which of your packs is sonically closest to the one given IR? (because THIS IR is fenomentical!!!)
  26. L

    FM9 Perfect tele amp combo/Deluxe & Dumble

    Fantastic work - like always ;) Best regards!
  27. L

    FM9 John Mayer Sob Rock Dual Amp Preset Tutorial

    OK, thanks for explanation, all best for you!
  28. L

    FM9 John Mayer Sob Rock Dual Amp Preset Tutorial

    Hello Fantastic tutorial, great tone. Thanks for your work! I have one doubt. You place both amps in a stereo pan on the far left and right channels (Balance value for amps -100 and 100). Same for both IRs in the Cab block. However, the Input for the CAB block is set to Sum L+R, which basically...
  29. L

    My version of Andurino's MIDI controller for FM3

    Hello Enclosure prepared me friend with special tools for metal. If you wan, I can give you contact to him directly
  30. L

    FM9 Firmware Version 3.00

    ^^This solution don't works on FM9: ^^This solution also don't works on FM9: A here we see, how its works on FM3 (only first example): In me opinion we have difference/issue in FM9 Best regards L.
  31. L

    FM9 Firmware Version 3.00

    Expression pedal issue: If there is a block in the preset that has AutoEngange related to the movement of the expansion pedal (Medium Speed) - then if with Power On FM9 this preset is loaded (as the last one used in the earlier Power Off), and the expression pedal is NOT present (nothing is...
  32. L

    Level for SPDiF output

    Is there any independent way to adjust the output level of the SPDiF output? (Independent, i.e. no changes to the preset). In FM3, the level at the SPDiF output depends on the Level 1 potentiometer on the housing, but in FM9 it does not depend any longer. So how do you regulate this level?
  33. L

    "Seagull" effect with Axe FX III

    Thanx, I see now. (In FM3 we lost Amp from first row. Witch one is more important?) (And we dont have Out3 - but I think this for use outer guitar cab, not important for seagull)
  34. L

    "Seagull" effect with Axe FX III

    Ooo.... No send/return needed? Hmmm.... EDIT: Yes, you right, send/return block not neede (I put it, but no turn on to work - Return Level was 0%, me stiupido) But yes, please, paste here your screenshot of axe-edit! ;)
  35. L

    "Seagull" effect with Axe FX III

    Maybe someone would be nice and convert this preset into a form acceptable by FM3? I am trying to import it into my FM3 - but some blocks in the first line are missing. Should there be Return / Send blocks? EDIT: Blocks Send/Return on ends of first row helps :D (plus changed IR in CAB block)...
  36. L

    My version of Andurino's MIDI controller for FM3

    It is difficult for me to send you any hints, because I do not have a schemat (it was too simple for me, so I did not draw it), and most of the hints for Ardurino I took from the Internet - but almost in my language (polish). You will definitely need this (libraries for creating MIDI messages)...
  37. L

    My version of Andurino's MIDI controller for FM3

    It is already working, zero cables outside this construction ;) Power is taken from faslink this angled XLR plug, cables are routed under FM3. You may not see it very well, but the power and MIDI jacks on the controller are underneath. Therefore, no cables protrude beyond the controller and FM3...
  38. L

    "Seagull" effect with Axe FX III

    And new one: https://axechange.fractalaudio.com/detail.php?preset=9812
  39. L

    Let's see those FM3 rigs!

    You know... architecture Master-Slave :D Genuie Fractal Audio, the most wanted ;)
  40. L

    Let's see those FM3 rigs!

    FM3 + selfmade MIDI controller = work in progress ;)
  41. L

    My version of Andurino's MIDI controller for FM3

    Assumptions MIDI controller, four buttons, quick and long press minimum dimensions design as close as possible to FM3 ZERO cables outside What do you think?
  42. L

    Initial values of Externals during changing preset

    I am programming a MIDI controller on Andurino and I ran into some action that was a bit unexpected, and which - upon reflection - is even logical. The point is that if I use the External_X variable in fractal unit (FM3, but I suspect it is similar in all of them) as a bypass control variable...
  43. L

    Connection of the reference voltage for the two EXPedal inputs

    The FM3 has two inputs for the EXP (for expression pedals or footswitches; in my question my focus is on the expression pedals). The expression pedal is nothing more than an encapsulated potentiometer. It has three "connects" - reference volatage ("upper" potentiometer connect), mass/GND...
  44. L

    FM3 Firmware Version 5.02 beta 1

    I confirm black screen on start FM3 after initializaton (for few second) - every times. No other issues.
  45. L

    FM3 Firmware Version 5.02 beta 1

    "Scene ignore" from last AX3 firmware is not implemented, right?
  46. L

    Trigger control switch from MIDI CC

    I would also like to emphasize how important it is for me to be able to control the CS state via MIDI. CS is probably the only modifiers that can set three states between Scenes - On, Off and Last. This "Last" setting allows you to build scenes in tahat way, so that it is possible for certain...
  47. L

    Wish Control CS with MIDI (In)

    +1 (or +1000 :D) Or mayby do next table in Setup>Midi/Remote, when we can connect/link CS (1..6) with ExternalSwitch (1..16). (And ExternalSwitch still can be connected to MIDI CC, that this link shoud work: MIDI CC in > ExternalSwitch.X >ControlSwitch.Y)
  48. L

    FM3 Firmware Version 5.00 beta 1

    I confirm, it is the same for me. In addition, the squeak (pitched tone,oscialtons) also changes if I move the parameter Transform Matching (value below 1.0, near 0.5)
  49. L

    Source for Headphones

    I know how it is in AXE3 and FM3 (hardwired to Out-1) I am asking if something has changed in FM9 - maybe FAS has changed the structure and in FM9 it allows you to choose the source for the headphones... It would be great ;)
  50. L

    Source for Headphones

    Is there only one source for the headphone output (out 1 as in FM3) or can it be selected in the settings (each OUT 1-3)?
  51. L

    FM3 Firmware Version 4.01

    Here you go ;) The preset uses the commercial IR UltraRes, I can't include it, it's YorkAudio Bogner V30. In firmware version 4.00 preset fluctuated around 80% CPU, now n version 4.01 84% and sometimes displays "Warning" in FM3Edit (ie jumps over 85%). Best regards and thank for you job and...
  52. L

    FM3 Firmware Version 4.01

    MeToo
  53. L

    Wish Controllers in CabBlock to control parameter MUTE

    Added the posiblity to include Controllers (SceneControl, ControlSwitch, etc) to the MUTE parameter in the CAB block, so that the IR can be changed without having to change chanell. Changing the chanell in the CAB block causes a slight gap, while changing the state of the MUTE parameter would be...
  54. L

    FM3 Firmware Version 4.00 beta 2

    On 4.00 beta1 we have Cygnus, but fun work normal (= no speeding, no noise). Now, on 4.00 beta 2 fun turn on offen - why? Beta 2 comapre to beta 1 is change only output 2 volume issue fix. But in me opinion something changed also in fun managment algoritm and fun turn on more often
  55. L

    FM3 Firmware Version 4.00 beta 2

    Fun turn on offer then previous firmawere versions (but temperature in room not changed)
  56. L

    FM3 Firmware Version 4.00 beta 1

    4.00.beta issues - small display occasionally goes blank
  57. L

    Bug? When connected to computer it behaves oddly, automatic scrolling thru presets.

    Edit: I now have jumping through presets once every two days (version 3.03beta). When this happens - FM3 is ALWAYS hooked up to FM3-Edit and USB. Jumping takes about 10 seconds, is initiated (I suspect) somehow via USB and data is sent to FM3 from the editor. However, if during the automatic...
  58. L

    FM3 weird issues

    Look here: https://forum.fractalaudio.com/threads/when-connected-to-computer-it-behaves-oddly-automatic-scrolling-thru-presets.170731/ Its the same problem?
  59. L

    Bug? When connected to computer it behaves oddly, automatic scrolling thru presets.

    + Still happens in 3.03b
  60. L

    FM3 Firmware Version 3.03 beta 1

    EDIT: And just a moment ago I had a problem with self-jumping presets again (which I haven't had for at least a month). FM3 + USB +FM3Edit
  61. L

    FM3 Firmware Version 3.03 beta 1

    In my case, the stability of fm3eDIT and the USB connection to FM3 is much worse than in the case of 3.02. FM3Edit crashes every 10 minutes on average (for version 3.02 it was once every few days. New Drivers and UltraRes - excellent job, FAS!!!
  62. L

    Software for recording screen with sound from ASIO source

    Thax Chris - very usefull soft!
  63. L

    Software for recording screen with sound from ASIO source

    Do you have any software suggestions that would record a movie of what is happening on the Desktop (system Windows), but as the sound source for this movie, you can choose one of the ASIO sound cards in the system (e.g. FM3)? Great if this software allows you to select the screen which is the...
  64. L

    FM3 Firmware Version 3.02 Beta 1

    Of course I can do it, only I am from Europe, it will not be a problem that my seller is g66? EDIT: @BryantP If it helps - I can play the next few days on 3.02b and check if the problem of jumping presets will repeat (with FM3-Edit connected and without it). If the preset jumps - I can go...
  65. L

    FM3 Firmware Version 3.02 Beta 1

    @BryantP , thanks for the suggestion - but ... well, it would be a really strange coincidence, because BEFORE firmware 3.02b I never experienced jumping of presets. Of course, I do not exclude the encoder breaking - but ... well, on Friday, I installed the 3.02beta version and immediately on...
  66. L

    FM3 Firmware Version 3.02 Beta 1

    Today 3 hours of practice WITHOUT FM3-Edit - and no skipping presets. The computer to which FM3 is connected was also turned off.
  67. L

    FM3 Firmware Version 3.02 Beta 1

    No, nothing. FM3 is connect to PC via USB, on PC ther was opened only FM3-Edit (and Firefox, but its not importand i hope ;D).
  68. L

    FM3 Firmware Version 3.02 Beta 1

    I noticed the following problem three times in this beta: FM3 started to change presets all of a sudden on its own. The phenomenon comes by itself, during normal play, I didn't press anything on FM3 or in FM3-Edit. I do not know what triggers them, it starts spontaneously, lasts a few or a dozen...
  69. L

    Wish Performance Page: OUT Meter as an item (or a "Preset Leveling" page)

    +1
  70. L

    Wish Scene output levels on Performance page

    +1
  71. L

    FM3 Firmware Version 3.02 Beta 1

    Where is screen (on FM3 or on FM3-Edit) to set this initial Value? I can't find... :/ EDIT: I found on FM3: setup> midi / remote> general. I was confused by "MIDI" at the beginning;)
  72. L

    FM3 Firmware Version 3.02 Beta 1

    Its possible to add ControlSwitches to Performance Page? If yes - that how? (I don't know what you changed there :), but it's better again. Great job!!)
  73. L

    Wish Controllers page - imposible to see parameters to change (on FM3 screen)

    The situation concerns FM3 used from the screen and buttons (not from FM3-Edit) If we want to see what controllers are used in a preset, we shoud press button C on the Main Preset screen, and then a few times Page>> until we get to the "Controllers" screen: But this "Controllers" screen we can...
  74. L

    FM3 Firmware Version 3.01

    ^^ +1 And I still have the occasional (much rarer than before, but still) USB connection problems with FM3-Edit.
  75. L

    Everything you've always wanted to know about LEVELS (III, FM3, FM9)

    @yek - on FM3 physical OUT1 knob also affects the level of loudness in the SPDIF port (and this is before the D/A conversion i think).
  76. L

    Fixed FM3 Output suddenly goes silent

    @yek, I followed this path, kicked various modifiers out of the preset. There are three modifiers left in the AMP block itself - and there are still audio drops, and after a dozen or so minutes the sound disappears, the AMP block has a red out meters, and all subsequent blocks have red meters...
  77. L

    Fixed FM3 Output suddenly goes silent

    @yek My presets always look the same. It differs only in the model of the amplifier and drive depending on the guitar. I use ControllSwitch to turn effect blocks on / off - because this is the only way that blocks can stay in their state when switching scenes (there is another method so that...
  78. L

    FM3 Firmware Version 2.00 Public Beta 1

    @Admin M Thanks for the answer, but the USB problems for FM3 also include using FM3-Edit (especially using FM3Edit is very frustrating, because firmware 1.06 is very unstable with USB). I managed on the third computer - FractBot worked there and I uploaded beta 2.0. But 2.0 Public Beta 1...
  79. L

    Fixed FM3 Output suddenly goes silent

    I have identical problems with FM3, v1.06 AND still in v.2.0 beta public 1. Here I described the problems with version 1.06 (preseta avaiable in posts): https://forum.fractalaudio.com/threads/fm3-firmware-release-version-1-06.165312/post-1993056...
  80. L

    FM3 Firmware Version 2.00 Public Beta 1

    Yes. Latest Fractal-bot, latest driver for Windows USB - both fresh instalation from Fractal website. Two PCets, both Windows 10 (latest). Thesame issue.
  81. L

    FM3 Firmware Version 2.00 Public Beta 1

    Dear FAS Team How am I supposed to backup my FM3, how are the USB connection problems so dominant that even Fractal-BOT reports communication problems? How should I upload the new firmware, since the USB connection is so unreliable that I do not know if FM3 / USB will hang while uploading the...
  82. L

    FM3 Firmware Release Version 1.06

    The problem with the suspension of FM3 in such a way that the sound in the Amp block disappears, the output sound completely disappears, and the meters turn red - not only Friedman HBE. Here we have the same for the Atomic High model. The first video shows that FM3 crashed in the described way...
  83. L

    FM3 Firmware Release Version 1.06

    @chris In my case, I do not notice any repeating circumstances (consequences of specific actions). Only in the case of sound fading the element that distinguishes it from other presets is the amplifier model (Friedmann HBE). Yesterday FM3 crashed for 2 seconds (disappearing sound, LEDs and...
  84. L

    FM3 Firmware Release Version 1.06

    FM3 has crashed again in a similar way (no sound, frozen AMP Friedman block, screen, buttons and led are working; only way to back of sound is a hard power reset). Preset devoid of a few blocks, CPU Usage at 71-73%. Two suspensions again and again, 5 minutes apart. I still think this is a...
  85. L

    FM3 Firmware Release Version 1.06

    1. I looked at my other preset yesterday. It is constantly oscillating between 83-85%. I've been playing it for 2 months and it never hangs like the preset I put yesterday (the one with model Friedman). This preset uses the Boutiqe 2 amp and is sound-stable at all times. So, maybe the problem...
  86. L

    FM3 Firmware Release Version 1.06

    Maybe it's on the edge or maybe not. But - is this what should have happened in equipment for live playing at such a borderline moment - sound completely turned off? I agree with you that we can assume different things. Fractal itself has the greatest knowledge, I believe, it has a lot of...
  87. L

    FM3 Firmware Release Version 1.06

    If the above problem (suddenly disappearing sound and blocking the AMP block) is the result of high CPU usage, why won't FM3 write it to me on the screen ("hello User, CPU is to high, please delete something block")? Why doesn't turn off, for example, the Reverb block (as it did in the AX8), but...
  88. L

    FM3 Firmware Release Version 1.06

    Yesterday once again FM3 crashed while playing. Suddenly it stopped and made no sound anymore. Buttons, LEDs, and a screen - everything was still working. It looks as if the AMP block is frozen - because the processed signal disappeared from it. I draw this conclusion from the layout> leveling...
  89. L

    FM3 Firmware Release Version 1.06

    Yesterday my FM3 also had a freezing problem for all buttons, LEDs and encoders. It happened when I left the guitar for a dozen or so minutes, FM3 was on, connected to FM3-Edit via USB cable, guitar was lying there. After returning, the audio signal was still processed, but the buttons, LEDs and...
  90. L

    WTB AXE 8

    AXE3 or AX8? AXE 8 propably dont exists ;) If you are looking for AX8 and you are from the European Union - here one is: https://forum.fractalaudio.com/threads/ax8-for-sale-pl-eu.165577/
  91. L

    Homemade 9V Power Out for pedals on FM3

    And there is no supply voltage on the FasLink II connectors? After all, they must be powered FC6 / FC12 in some way. Everything goes with one XLR cable that has three wires. So I would suspect that the first is a common ground, the second is the power supply (and hence you could try to take the...
  92. L

    FM3: G66 availability?

    Did you buy an iron for ironing from them ?!?? :p
  93. L

    Celestion F12-X200

    My opinion, it may be useful to someone: Over the weekend I got used to the Celestion F12-X200 in a small closed cab with bass-reflex holes (cab slightly smaller in volume than the one suggested by the Celestion website in the DIY project). We used DIY amp in class D 100W for powered this...
  94. L

    A bit about flattening the frequency characteristics and easier work with the sound (long)

    Is it really me only who has this problem? :D:D I thought everyone had to deal with this and I am looking for a path that will help everyone ;) Snapshots in GlobalEQ would also be pretty good, although GlobalEQ doesn't have the same frequency resolution as IR (if they had, we wouldn't need IR...
  95. L

    A bit about flattening the frequency characteristics and easier work with the sound (long)

    I am not saying that the use of "differential FM curves" and / or null influences of speakers through the use of "negative" IRs will solve the problem. It is obviously not, because the room, cubature, open air, etc. are still important. However, I think the setting would be much easier: you...
  96. L

    A bit about flattening the frequency characteristics and easier work with the sound (long)

    I'm very glad @lqdsnddist has a PhD in audiology, good for him. It is possible that unintelligible creeping in somewhere (English is not my native language). However, I will defend the thesis that the preset prepared "for the ears" for 50dB, boosted without any changes, on an audio system...
  97. L

    A bit about flattening the frequency characteristics and easier work with the sound (long)

    PEQ (or GlobalEQ) propably will be still needed. But use "FM convolution curves function" imo can do all sound tweking for different level mutch easier. No external mic, no shooting reference IR on every systems - IR for speaker as file only from a loudspeaker manufacturer. Loudspeaker...
  98. L

    A bit about flattening the frequency characteristics and easier work with the sound (long)

    Yes, of course you can do that - but you don't always have time before the concert to play settings in AXE-Edit, you don't always stand next to the mixer to listen to what's going on, and in the club at high volume you have little time before high sound will not cause that the ears will fade...
  99. L

    A bit about flattening the frequency characteristics and easier work with the sound (long)

    "human auditory system has the best perception for the mid frequencies" Yes, on typical sound level 50-60dB mids are 20db bellow lows and highs to hear "equal volume" (look on first graph). It just means that we are ready to hear mids - just means that 20dB will be quieter than low and high...
  100. L

    A bit about flattening the frequency characteristics and easier work with the sound (long)

    The second topic that comes to my mind is whether FAS products could "improve" the frequency response of the target speakers (physical sound system). Let's look at this chart: This is a graph showing the frequency response of an example Celestion F12-X200 speaker (here: link). The red line was...
Back
Top Bottom