Search results for query: *

  • Users: phil36uk
  • Content: Threads
  • Order by date
  1. phil36uk

    Yngwie Malsmsteen “Rising force” cover

    Here's a quick cover of me attempting my fave malmsteen track. Amp used was Plexi100 high with Basketweave AX mix cab.
  2. phil36uk

    Aerosmith - “Love in an Elevator” full cover

    Here's something we done that was quite a big project. A cover of the Aerosmith classic with an extra 19 singers or so. All done remotely as we are still in isolation.
  3. phil36uk

    Survivor - "Didn't know it was love"

    Here's a full band cover of a great Survivor tune. We are keeping ourselves busy in these times of isolation. Axe FX2 direct.
  4. phil36uk

    "Hearts on the Highway" solo

    Here is the guitar solo by Rob Marcello from Danger Danger using the axe FX2 with
  5. phil36uk

    The Spirit carries on using new firmware Ares

    Tricky solo took a while to get right. I used the new update which I think is great, amps sounds fatter and more natural. This is a USA Lead BRT + Ts08 in front Cabs are RECTO SM57 panned hard left and RECTO M160 panned hard right. I double tracked the solo. It's not perfect but gives it a...
  6. phil36uk

    Under a Glass Moon

    Bit tricky this one. Recorded direct using Axe FX2 amp model was USA Pre Lead 2 Red, Cab was Cali Lead 80's 57. I put a T808 OD in front to tighten it up a little.
  7. phil36uk

    I wouldn't want to be like you (Guitar Solo)

    here is the solo off the Alan Parsons project song 'I wouldn't Want to be like you' from the I robot album. Used the middle position single coil on my Ibanez RG1570, Axe FX2 direct using the JTM45 amp with a BB pre in front with a hint of stereo chorus.
  8. phil36uk

    Noisy amps

    Hi not sure where to post this as it's not really a bug but I'm getting an awful lot of static type noise from my axe fx. This is off a Brit800 mod. It's not even that high gain and there is no gate on as I've never really liked using them. if I was to turn the gain down until the noise goes...
  9. phil36uk

    IA buttons multiple function

    Hi, is it possible to set the IA switches on the MFC101 to do more than one effect. For instance one preset I want button 13 to switch delay 2 on and off. Another preset I want button 13 to switch Multidelay on and off.
  10. phil36uk

    How do I get this effect?

    This is from a Richie Kotzen solo. Any ideas on how to get it? Sounds like chorus but I've tried a few settings and cannot get anywhere near.
  11. phil36uk

    A cover of Erotomania

    Hi all I've attempted the cover the great instrumental by Dream Theater using Mesa MkIV cab used was the german boutique no. 48. All rhythm guitars are quad tracked using the MKIV and TX clean amps, all guitar on this is axe FX2.
  12. phil36uk

    John Petrucci Tonematch Quantum 1.01

    So I've decided to learn a bit of DT and in particular Erotomania, so though I would go the whole hog and try a tonematch. I was surprised at the result. I love this black box. :D
  13. phil36uk

    whitesnake still of the night cover. fw18.04

    Here is a vid of my band doing a bit of whitesnake. I Used the jvm od1 orange setting with the basketweave tv ax cab 102. For the clean part I used the marshall jtm45. Probably a little too much gain on the jvm. https://youtu.be/-1qoPdgsmKM
  14. phil36uk

    FW18 MKV tonematch Pull me under

    Loving this update, not really had much play with the MKV model so had a few minutes spare and done a tonematch off Pull Me Under. Any tips guys, sounds pretty close to my ears, possibly too much low end but can easily be sorted. Patch here...
  15. phil36uk

    vu meter issues regarding difference in volume

    Hi all. I've been setting up some new patches for a new band and used the vu meters to level them all. I use output 1 to the foh and output 2 to the onstage cab. I've noticed there is a few db more difference in the output 1 vu meters. Is this because of the cab block as that is the only...
  16. phil36uk

    Stereo Problem

    Hi, just recently starting knocking some stereo patches up and find that I have a problem with the right side of the stereo field. I have output 1 mode set to stereo and I'm using a stereo cab with cabs panned around 10 and 2 o'clock. Left side sounds fine, the right side sounds echoey. Here...
  17. phil36uk

    Van Halen Panama Cover

    I know it's been done loads before and this is not perfect, wasn't going for VH tone just testing out a preset I made for most of the classic rock songs we do. It's Friedman HBE, Basketweave AX and TV cabs panned left and right respectively and a bit of Stereo chorus and delay too.
  18. phil36uk

    had a scare tonight at a gig

    Yeah so when I switched my axe fx on the led screen was scrambled and the led lights were all lit up. I switched it off and back on and it done it again so switched it off and left it for a while. When I switched it back on it worked fine. Is there anything to worry about or could it just have...
  19. phil36uk

    Journey Separate Ways cover no vocals

    Using the JVM OD1 or model through a V30 Studio vintage 4x12 cab. Really digging this combination right now.
  20. phil36uk

    drive block

    Alright guys. I primarily use a friedman hbe amp with the basketweave tv ir. I love the sound overall but would like to get a high gain long sustaining kinda sound ala neal schon but don't think there is enough gain on the amp to mimic that kind of tone but once I add a drive block to the...
  21. phil36uk

    Big Wreck - A Million Days solo

    My attempt at the great solo by Ian Thornley, was a tricky one that's for sure. The amp is a Friedman HBE as always and the cab is the 4x12 Basketweave TV mix.
  22. phil36uk

    Friedman HBE latest firmware

    Hi, done a quick recording of the solo of Gold Digging Whore by Steel Panther. Always liked the solo so thought I would give it a go. Recorded using the Friedman HBE rhythm guitars double tracked and panned, lead added delay. Cab used is OH_412_MAR-CB_T75-RI_Live-Modern
  23. phil36uk

    Axe FX 2 Reo Speedwagon cover

    A recent recording using the newest firmware. Amp Model is Friedman HBE. I have ultra res cabs, running in stereo, obviously doesn't pick that up from this video recording but sounds cut through fine, and a few comments from the night that the tone was pretty damn good. Infinity - Take It...
  24. phil36uk

    gigging with the new firmware

    Wow. I have 5 patches and using scenes in each patch. I hear and feel a difference especially with the friedman hbe don't know why but it just felt amazing to play. Couple of things I've noticed though and seemed like I could hear a gap changing scenes don't know if it is just because I'm...
  25. phil36uk

    Anyone know how to?

    Control the rate via a foot controller as in this method of the ray gun effect. I can't find the rate parameter on the LFO controller :( http://forum.fractalaudio.com/axe-fx-ii-preset-exchange/52940-steve-stevens-ray-gun-effect.html
  26. phil36uk

    fcb1010 expression pedals

    Hi is it just me or do the expression pedals let the unit down. I've calibrated the pedals use a for wah and b for volume. Both pedals have to be practically pressed half way before something happens. Rubbish for volume swells and even operating the wah slowly. Does anyone else have this problem?
  27. phil36uk

    My band covering Eagles "Life in the fast Lane"

    All guitars are Axe FX 2, I've overdubbed a guitar using FW11.03 Jumped Plexi preset, love that sound.
  28. phil36uk

    FW11b Now I get it

    I use a cab on stage, poweramp into output 2 and direct to pa through output 1. Now I know it sounds great through our PA rig, helps that it is a top spec RCF TT+ but just really noticed the difference it makes through my cab. I like to play quiet as I mix the band on stage so need to hear...
  29. phil36uk

    controlling fx on and off.

    Hi the way I control my fx to switch on and off is I use the behringer fcb1010. I use the exp pedals and assign the mix parameter to 0 when the pedal is not pressed. When the pedal is pressed I set it to the percentage desired. My question is when setting mix to zero is that effectively...
  30. phil36uk

    FCB1010 foot volume

    Hi, anyone got any tips for the best way to add a volume pedal to one of the expression pedals of the Axe FX? I've tried but the results are undesirable, seems the pedal is halfway down before any volume is heard, and isn't very smooth.:(
  31. phil36uk

    I think my axe FX is fried :(

    Just updated it and was having a bit play, made some new patches and all of a sudden just made popping noise and no audio..:nightmare: Click on pic for video. When I switched it back on this was all I got. I'm gutted. :(
  32. phil36uk

    I need more volume

    On stage I use a marshall 2x12 with 8080 poweramp. I never had any problem with volume when using a boss gtpro but after doing the patches on the axe fx so they are not clipping I just don't have enough volume to hear myself onstage. Any tips for increasing the volume without clipping or is...
  33. phil36uk

    awww shit my axe fx is baked!!!

    And I can't wait to try a slice.:lol
  34. phil36uk

    Anyone heard this guy before

    He's a guy called Eric Class from California I believe. He really does the AXE FX 2 justice. The solo near the end is just breathtaking. :shock https://soundcloud.com/ericglass-1/resurrection-mary
  35. phil36uk

    another fcb1010 question

    Probably something I am overlooking but if I am switching presets and an expression pedal has for example a lead boost and delay assigned to it how do I set it so no matter what position the pedal is in it won't be activated until I hit the pedal myself. Hope that is clear.
  36. phil36uk

    FCB1010 exp pedal help assigning bypass

    Hi I want to be able to set exp 1 of my FCB1010 to bypass 3 blocks at once, such as GEQ DEL PHR. What will be the best and easiest way to do it. I don't really want to have to change the CTRL numbers around too much. Cheers.
  37. phil36uk

    Level problems when engaging fx block

    Hi still getting to grips with the Axe FX and i'm having a slight problem. When I engage an FX block such as chorus there is a big level drop. Even when I turn the mix level to zero. I've placed the block right after the amp block, but can't seem to figure out why it is doing this. Can...
  38. phil36uk

    Multiple amps live

    Hi guys, when using the axe fx 2 live and using different amps on different patches etc. What do some of you guys prefer to do when using cabs? Do you use same cabs through out all patches or match amps with cabs? At the moment I just use the same cabs for consistency but really am...
  39. phil36uk

    fcb1010 assigning multiple controls to one exp pedal

    Hi is there a simple way that I've overlooked to assign multiple fx or whatever to an expression pedal without it affecting other preset patches. for instance on exp 1 I want to put a delay and volume boost on. On another preset I might want to add a wah on. How can I do that without affecting...
  40. phil36uk

    Wah sound on Behringer FCB1010

    Hi all, is it possible to assign the wah on an expression pedal on the FCB1010, I've tinkered about with it but cannot get the desired wah sound and have it switch on and off too as a real wah pedal would. Anyone got any settings I could try? :D Cheers.
  41. phil36uk

    Cab and FOH routing help

    Hi i'm new to the Axe FX 2 and have to say it is awesome, though i'm finding it a bit difficult to sort the routing out. I run a cab and poweramp on stage and want to send a signal direct to the FOH PA too. How do I send the same signal to output 2 as well as the FOH, obviously I don't...
Back
Top Bottom