oooohhh the sig-x would be an awesome addition. that thing is a beast and sounds insanely good
Just fyi, fractool has an easter egg search toolNew MegaTap Delay types :
- Diffused Ping-Pong Echo
- Echo Room
But the manual says the bitrate is set lower with the Vintage Digital Delay type. IIRC setting it to above 13 makes it kind of unusable already. 24-13=11. That can’t be right.
Man, I literally busted out laughing at this. You win the internet for me today @IronSeanView attachment 133437
Yeah but the models just for CH3 would be
SigX CH3 Brown LESS SCOOP
SigX CH3 Brown LESS WOOD
SigX CH3 Brown MORE SCOOP
SigX CH3 Brown MORE WOOD
SigX CH3 Brit LESS SCOOP
SigX CH3 Brit LESS WOOD
SigX CH3 Brit MORE SCOOP
SigX CH3 Brit MORE WOOD
SigX CH3 Blow LESS SCOOP
SigX CH3 Blow LESS WOOD
SigX CH3 Blow MORE SCOOP
SigX CH3 Blow MORE WOOD
And aside from the fact that no one would ever stop laughing at an amp model called "BLOW MORE WOOD" That's assuming the NORM/BOOST switch could be emulated by turning Gain II to 0 for Normal.
Though Brown/Brit/Blow might be possible to emulate with inputEQ and wood/scoop with amp EQ before the power amp which makes things a little more sane.
If you do, it'll be in the release notes. Since it wasn't in the release notes: you do not.Do we need to 'reset amp blocks' or anything?
Any possibility of that “corrected” FAS version sometime in the near future?Updated Friedman BE/HBE models.
View attachment 133437
Yeah but the models just for CH3 would be
SigX CH3 Brown LESS SCOOP
SigX CH3 Brown LESS WOOD
SigX CH3 Brown MORE SCOOP
SigX CH3 Brown MORE WOOD
SigX CH3 Brit LESS SCOOP
SigX CH3 Brit LESS WOOD
SigX CH3 Brit MORE SCOOP
SigX CH3 Brit MORE WOOD
SigX CH3 Blow LESS SCOOP
SigX CH3 Blow LESS WOOD
SigX CH3 Blow MORE SCOOP
SigX CH3 Blow MORE WOOD
And aside from the fact that no one would ever stop laughing at an amp model called "BLOW MORE WOOD" That's assuming the NORM/BOOST switch could be emulated by turning Gain II to 0 for Normal.
Though Brown/Brit/Blow might be possible to emulate with inputEQ and wood/scoop with amp EQ before the power amp which makes things a little more sane.
unless the switches are incorporated in the amp model(s)View attachment 133437
Yeah but the models just for CH3 would be
SigX CH3 Brown LESS SCOOP
SigX CH3 Brown LESS WOOD
SigX CH3 Brown MORE SCOOP
SigX CH3 Brown MORE WOOD
SigX CH3 Brit LESS SCOOP
SigX CH3 Brit LESS WOOD
SigX CH3 Brit MORE SCOOP
SigX CH3 Brit MORE WOOD
SigX CH3 Blow LESS SCOOP
SigX CH3 Blow LESS WOOD
SigX CH3 Blow MORE SCOOP
SigX CH3 Blow MORE WOOD
And aside from the fact that no one would ever stop laughing at an amp model called "BLOW MORE WOOD" That's assuming the NORM/BOOST switch could be emulated by turning Gain II to 0 for Normal.
Though Brown/Brit/Blow might be possible to emulate with inputEQ and wood/scoop with amp EQ before the power amp which makes things a little more sane.
That isn't how the Fractal modelling works though. A switch isn't incorporated in the model unless it can reasonably be applied to every model. That why everything has a FAT and CUT switch and a Depth and Presence, etc. But the Friedman HBE mode is a separate model.unless the switches are incorporated in the amp model(s)
Is that so? It’s then possible this might have been changed at some point. Or in the latest release? Not sure if I have reseted my delay block for 1-2 years, so that might explain it. I’m pretty sure the last time I checked the repeats were really degraded after 13. Thanks for checking out, not in front of my Fractals for almost two weeks.The Vintage Digital model defaults with it set to 16, which gives 8 bit resolution to the delay line. If you don't want it that degraded, set Bit Reduction to a lower value.
The FBEAny possibility of that “corrected” FAS version sometime in the near future?
If you select an amp in a new preset, it will always have the latest changes and you never need to "reset" the amp block correct? That is only for previously made presets?If you do, it'll be in the release notes. Since it wasn't in the release notes: you do not.