jimmynorrisjr
Experienced
I have an EV-1 and an EV-2 plugged into my Axe. When running the calibration, there is no movement. The calibration works fine on the FC-12 Pedal 1-4 with the same pedals and cables. Any assistance?
Yes. When I run it there is no movement compared to the calibration for the FC.Calibrate in the Pedal menu, not the FC menu.
Setup > I/O > Pedal menu on the front panel?Yes. When I run it there is no movement compared to the calibration for the FC.
Yes. I do have shorter cables going to the FC-12. I will try the longer ones with the FC-12 to make sure they are not faulty.Setup > I/O > Pedal menu on the front panel?
Are the longer cables TRS?Yes. I do have shorter cables going to the FC-12. I will try the longer ones with the FC-12 to make sure they are not faulty.
no.I really don't know how to even pitch this in a way that will be clear. Maybe it is not even possible for the pedal jacks on the af3 to function the same way as the FC pedal jacks, regarding the initial values. ugh ... Am I the only one who finds this to be a problem?