Hi, new to the forum, first pose. I've read more than 10 posts about issues setting up a wah expression pedal on the site trying to find my issue and can't. Just got my FM-3, love it, stoked. I'm trying to setup my wah using a Yamaha FC-7 which has the TRS plug. I'm trying to do it on the FM3 itself, I haven't used the FM3 Edit software yet. I've got it to pick up the pedal and it shows movement in the modifier section, however, the sweep is very small. I looked again at the calibration and with my pedal all the way back the "range of motion" in calibration puts it as probably around 20% on the graph. However, if the wah all the way back is at a 45 degree angle, just moving my pedal to a 35% degree angle puts the calibration all the way to 90-95% on the calibration and the rest of the sweep has no effect. In other words, a very small portion of the full sweep of the pedal is counting as the entire sweep. If I go into the wah control modifier it's the same result. All the way back (45 degrees) the wah is off and just pushing down a little bit (to roughly 35%) says the full sweep is done. In the modify section do I need to change certain numbers for start (0), mid (50), end (100), slope (50), or scale (1.000)? Off value is at 5%. I imagine there's just some numbers I need to tweak to change the allowed sweep range, but have no idea which. Sorry for the long explanation. Many thanks in advance to anyone that can help! It's greatly appreciated!