I think a patch like that should run on the ax8, I'll check as I get home.The following is as complex as I get in a patch
- Input Block - Intelligent Noise Gate engaged
- 1 x Looper
- 1 x Ext Pedal controlling 1 x Pitch Block - Classic Whammy down 1 Octave
- 1 x Drive Block - King Of Tone -or- Timmy Drive no XY needed
- 1 x Amp only no XY needed
- 1 x Cab but running 2 IR's no XY needed
- 1 x Chorus no XY needed
- 1 x Delay no XY needed
- 1 x Reverb no XY needed
- 1 x Filter Block no XY needed
- Output Block
Can such a path be "done" in an AX8 (?)
Ben
PS:- Does the AX8 10.01 have "Speaker Compression" and "Speaker Compliance" in the Amp Block as yet (?)
I think a patch like that should run on the ax8, I'll check as I get home.
Anyway there's no king of tone and no speaker compliance in the ax8 at the moment, and the pitch block doesn't work as good as on the axe fx III.
Here you go:
View attachment 54032
This patch has everything set at the highest quality and 2 ultrares IRs.
If I set reverb quality to normal it goes down to 79%, if I lower density to 2 it goes to 73%, and you could still reduce cpu usage by selecting non-ultrares cabs, classic gate, different reverb models and so on.
It seems plenty of power for your needs
For the most part it's glitch-free at 86% but it depends on the patch and with one exception: the pitch block.Thanks heaps DLC86 - thats awesome to know !!!
Im curious now => does the AX8 run "glitch-free" at ~ %86 load ? or does it only get "flaky" at >%90 load ?
Ben
As far as I know, it is possible, but only within an equal bank.Thanks for all the great info - still waiting to hear back from my colleague re: his AX8 but in the [hopeful] meantime, last question if I may - regarding the FSW's is the following configuration possible:-
=> FSW 5, 6 and 7 each have a preset assigned to them
=> FSW 1, 2 and 3 each select a Scene for the selected Preset
=> FSW 4 and 8 each select an EFX on/off ie: say Drive and Delay
Thx,
Ben