Wah with Gordius LG2 and Axe-FX

[wembley]

I'm trying to set up an expression pedal via the Little Giant 2 to control my wah block. However, the only thing I'm able to control with this pedal is the wah block on and off (CC number 24, if memory serves me right). No sweep through the frequencies like a wah. I did this on my previous midi board, but I can't make it work here.

The pedal is recognized, but only controls wah on/off. What am I missing?

Thanks.

 

[MisterE]

Hi Wembley,

the way I've done it:

On the Axe-Fx:
Set Frequency to External controller (in my case #1)
Assign a cc# to Externla 1 in I/O - CTRL (in my case #41)
Set Autoengage to "Fast"
Off VAL to 5%
I've added damping to avoid zipper noise : 55ms
On the Gordius:
Add a pedal (I called it External 1)
Set CC# to the one assigned to External1 (in my case 41)
Set output range to 000-127

 

[wembley]

Hi Wembley,

the way I've done it:

On the Axe-Fx:
Set Frequency to External controller (in my case #1)
Assign a cc# to Externla 1 in I/O - CTRL (in my case #41)
Set Autoengage to "Fast"
Off VAL to 5%
I've added damping to avoid zipper noise : 55ms
On the Gordius:
Add a pedal (I called it External 1)
Set CC# to the one assigned to External1 (in my case 41)
Set output range to 000-127

Thanks, I thought this was what I'd done, but I'll check as soon as I get home.

 

[wembley]

Hi Wembley,

the way I've done it:

On the Axe-Fx:
Set Frequency to External controller (in my case #1)
Assign a cc# to Externla 1 in I/O - CTRL (in my case #41)
Set Autoengage to "Fast"
Off VAL to 5%
I've added damping to avoid zipper noise : 55ms
On the Gordius:
Add a pedal (I called it External 1)
Set CC# to the one assigned to External1 (in my case 41)
Set output range to 000-127

Thanks! Problem solved, overlooked External 1 in I/O, stupid mistake.