3dognate
Inspired
So here's the deal... Here's what I'm after, I have a Mission Expression pedal with a toe switch.
I want that pedal to function as follows...
I thought I'd ask how to achieve it so that it just stops sweeping Ext 1 for the filter block level while leaving it engaged when the toe switch is on (100%) and back to normal sweeping of the Ext 1 for Filter block level when the toe switch is disengaged. (This behavior is available in the GSP1101, All the Line 6 floor units) but I'm a newbie at modifiers in the AX8 but would like to continue to use this method as I find it perfect for my work flow and need to "ride my own fader" live.
I want that pedal to function as follows...
- Switch off (Ext 2)+ Toe Up = normal volume (0.0 db on the filter block level on Ext 1 at the end of the signal chain)
- Switch off (Ext 2)+ Toe Down = Lead volume (+5 db on the Filter block's level on Ext )
- Switch on and Toe Down (Ext 2)= Wah engaged and active on Ext 1 and Filter at +5
- Switch Down and Toe up (Ext 2)= Wah engaged and active on Ext 1 and Filter at +5
I thought I'd ask how to achieve it so that it just stops sweeping Ext 1 for the filter block level while leaving it engaged when the toe switch is on (100%) and back to normal sweeping of the Ext 1 for Filter block level when the toe switch is disengaged. (This behavior is available in the GSP1101, All the Line 6 floor units) but I'm a newbie at modifiers in the AX8 but would like to continue to use this method as I find it perfect for my work flow and need to "ride my own fader" live.