Using External footswitch to turn delay on off in preset mode?

[NickH]

Hi there- got an Am4 on order and in planning mode. I have read the manual but until I get my hands on AM4 can't work this one out .

I have an Ampero dual footswitch and am hoping I can set is up in the AM4 to for one switch to be taptemp and other to switch delay on /off?

If yes how do I do this please ? ( think I understand how to do Global tap tempo from manua)

- I am planning to stay in preset mode and use four AM4 footswitches as

1- Clean with chorus
2. Vox style sound
3 Overdriven plexi
4 Lead

It would be great to be able to have delay as an on off option on Ampero footswitch to apply to all these presets - if not possible for Lead preset would work for me

Guidance gratefully received

thanks
Nick

 

[Rayos]

That's exactly what I do. And it works very good.

It's very easy to setup but I'm too far away from my AM4. When I'm at home I'll tell you if nobody has done it before.

I do it in Scene mode, but it's the same. And you can have all those amps/sounds in the same preset and use scenes. Your choice.

 

[Ken Os]

Like Rayos says you can have those 4 presets as scenes in a single preset...then any switches you assign to the Delay block will apply across all 4 scenes also there will be close to zero latency when switching scenes.
Many more reasons to use scenes as well.

Read the manual ...watch video's....

 

[Planeta Gales]

Hola, tengo un AM4 pedido y en modo de planificación. Leí el manual, pero hasta que no lo tenga en mis manos no puedo entenderlo.

Tengo un pedal doble Ampero y espero poder configurarlo en el AM4 para que un interruptor sea taptemp y el otro active o desactive el retardo.

Si es así, ¿cómo lo hago, por favor? (Creo que entiendo cómo hacer el tap tempo global desde el manual)

- Estoy planeando permanecer en el modo preestablecido y usar cuatro pedales AM4 como

1- Limpiar con coro
2. Sonido estilo Vox
3 Plexi saturado
4 Plomo

Sería genial poder tener retardo como una opción de encendido y apagado en el pedal Ampero para aplicarlo a todos estos ajustes preestablecidos; si no es posible para el ajuste preestablecido Lead, funcionaría para mí.

Orientación recibida con gratitud

gracias
Mella

proba en modo escena

en ese modo podés usar en cada uno de los pies 4 equipos y efectos distintos

Podes tener 4 amplificadores distintos o el mismo con distintas ecualizaciones. En cada uno de los bloques ABCD podrías usar hasta 4 efectos por pie (te da un total de 16 efectos) además podés usar ecualización y Noise/gate sin que ocupe lugar en tu cadena ​

éxitos

 

[NickH]

That's exactly what I do. And it works very good.

It's very easy to setup but I'm too far away from my AM4. When I'm at home I'll tell you if nobody has done it before.

I do it in Scene mode, but it's the same. And you can have all those amps/sounds in the same preset and use scenes. Your choice.

Thanks Rayos- it would be great if you could spell out for me how to do it- I have read read the manual .

best wishes

Nick

 

[Rayos]

I'll try to do from my memories. Click on the delay, so you see its parameters. In the lower right corner is the on/off button. It has a little circle; right click on it. It opens a menu. In the left side there is a desplegable thing. Choose pedal 2 (or 1). Done.

You can adjust some more parameters, but for the on/off thing that's enough.

Maybe you'll have to adjust something in the External Footswitch page. It's very easy but I think it can only be done in the AM4.

 

[NickH]

I'll try to do from my memories. Click on the delay, so you see its parameters. In the lower right corner is the on/off button. It has a little circle; right click on it. It opens a menu. In the left side there is a desplegable thing. Choose pedal 2 (or 1). Done.

You can adjust some more parameters, but for the on/off thing that's enough.

Maybe you'll have to adjust something in the External Footswitch page. It's very easy but I think it can only be done in the AM4.

Thanks Rayos- much appreciated!

 

[Admin M@]

One of the items on our list of considerations involves looking at the way the pedal jacks interact with global remote options. For example, today you can assign a MIDI CC# to show the tuner, but not a PEDAL jack. Once we address an issue which was set aside shortly before launch, there's a possibility that you'll see a more direct way to do this.