gdgross
Experienced
I have a stand in switch on all layouts that don't normally use switch #10. (FM3 only layouts). It's on FSW2 - ring.
It's set up to bypass/engage the pitch block on a short press and bypass/engage a PEQ block on a long press. But I'm getting what looks like unpredictable bypassing and engaging on both blocks. I recorded a video to illustrate the problem.
The physical switch is a momentary switch, and i've confirmed the behavior without the switch by manually shorting the ring to the sleeve.
here's the vid: https://www.dropbox.com/s/bl7ek9n90ckg55n/IMG_1770.MOV?dl=0
my apologies if this is just user error! it certainly could be
Thanks!
It's set up to bypass/engage the pitch block on a short press and bypass/engage a PEQ block on a long press. But I'm getting what looks like unpredictable bypassing and engaging on both blocks. I recorded a video to illustrate the problem.
The physical switch is a momentary switch, and i've confirmed the behavior without the switch by manually shorting the ring to the sleeve.
here's the vid: https://www.dropbox.com/s/bl7ek9n90ckg55n/IMG_1770.MOV?dl=0
my apologies if this is just user error! it certainly could be
Thanks!