PickerPelletier
New Member
Appreciate that! And you!! I’ll try thatI believe it's in the Manual under Recovery pg. 105. for FM3 Pretty simple really but if you've never have to do it or do it once in a blue moon one tends to forget about it
Appreciate that! And you!! I’ll try thatI believe it's in the Manual under Recovery pg. 105. for FM3 Pretty simple really but if you've never have to do it or do it once in a blue moon one tends to forget about it
How old is your FM3? I had one of the first batches without a headphone jack and it went bad a little after a year. I sent it in for repair and FAS sent me a brand new unit with HP jack! It did cost me $90 + ship because it was out of warranty I didn't care I was stoked to get a brand new unit.Appreciate that! And you!! I’ll try that
If it was working and then stopped, why assume immediately that you'd need to send it in?Well this feels like a kick in the balls if I have to send this out and pay out the ass....just received mine today, secondhand though still in like new condition. Messed around with it for a couple hours using FME Edit then needed to get busy trying to migrate all of my song presets from my AX8 so swapped the USB cord and worked on that for awhile. Went back to the FM3 and you guessed it, no f*****g connection!
All this after getting scammed on another FM3 last year....
Yes.If it was working and then stopped, why assume immediately that you'd need to send it in?
Try another USB cable, try another port on your computer.
Try powering FM3 and Computer off. With the USB disconnected, turn the computer on. Then connect the cable and then power on the FM3.
That seemed to be the general consensus from the forum browsing I did. First thing I did was restart my 10 year old turd of a mac, then switched USB cables. FM3 Edit and Fractool would not show a device, Fractal-bot acted like it could send/receive files but sat at 0% for far too long. Same cable went right back to the AX8 and Fractool recognized it immediately.If it was working and then stopped, why assume immediately that you'd need to send it in?
A 10 year old mac might have an issue with the USB itself. Do you have access to another computer? If so give it a shot. I had an issue like this with a CNC machine using an old mac where the USB was really intermittent some devices would connect others wouldn't, I changed machines and no more problem.That seemed to be the general consensus from the forum browsing I did. First thing I did was restart my 10 year old turd of a mac, then switched USB cables. FM3 Edit and Fractool would not show a device, Fractal-bot acted like it could send/receive files but sat at 0% for far too long. Same cable went right back to the AX8 and Fractool recognized it immediately.
After that frustrating troubleshooting, I found another tip somewhere on the forum and even though I'm 99% positive the outlets are on the same circuit, I moved the FM3 power to the strip my Mac is plugged into. Voila! FM3 Edit is back....
...until...I get the bright idea to update firmware from 6.00 to 6.02 annnnnnnd bye bye USB connectivity after the requested restart.
I have had a few flakey issues on the HX edit program but nothing anything like this nonsense.
You aren't by chance running standalone FractalBot and the editor at the same time?That seemed to be the general consensus from the forum browsing I did. First thing I did was restart my 10 year old turd of a mac, then switched USB cables. FM3 Edit and Fractool would not show a device, Fractal-bot acted like it could send/receive files but sat at 0% for far too long. Same cable went right back to the AX8 and Fractool recognized it immediately.
After that frustrating troubleshooting, I found another tip somewhere on the forum and even though I'm 99% positive the outlets are on the same circuit, I moved the FM3 power to the strip my Mac is plugged into. Voila! FM3 Edit is back....
...until...I get the bright idea to update firmware from 6.00 to 6.02 annnnnnnd bye bye USB connectivity after the requested restart.
I have had a few flakey issues on the HX edit program but nothing anything like this nonsense.
Also, I'm now also trying to see if it's a USB bus bandwidth issue by seeing if disconnecting other USB peripherals helps. I'll let you know what I discover...I just got a second-hand FM3 myself - also an OG unit with no headphone jack - and was running into similar issues this morning on my 2018 Win10 PC. A combination of reinstalling the latest USB drivers, rebooting my PC, power-cycling the FM3, and - I think this is the real kicker for me - switching to a different USB port - seems to be doing the trick for right now. I agree that USB can also be inherently finicky. Happy to be back in Fractal Land again though. While some plugins can be nice when you're just sitting at your PC, it's not the same experience for me personally as the Fractal stuff.
EDIT: nope, I'm still having USB problems. I opened a ticket with Fractal and am praying they'll be able to address it.
What USB port are you using? You can’t use the USB-A. You have to use the USB-B port on the FM3 ( the “printer” USB port).
Have you tried all this stuff?Was that question for me? Of course I'm using the correct port. As my post said, I haven't had a problem connecting since I purchased this 6 months ago. Seems like a firmware or FM3-edit update issue.