Show Your Virtual Rig

[lwknives]

There are threads for FC pedal boards and Axe FX rigs but it would be cool to see how people are setting things up on the layout and how people are setting up there FC switches and layouts!

 

[lwknives]

I dont have an Axe FX iii yet but if I did I would set it up like this:

The first three layouts would look like this:


The music I play most requires lots of delay changes, this setup would allow me to toggle through 1/8, dot 1/8 and 1/4 delays using one switch and then set the mix and CH selection of the delay using two other switches. Note that when a new subdivision is selected the layout changes so that you can change the channel of the selected delay with only one switch (vs taking up 3 switches, one per delay).
I also have the amp gain staging set up to give me 5 different gain settings that work completely independent from scenes or time based FX.
This setup would give a huge amount of flexibility with minimal tap dancing. This setup gives access to 26 delay settings with a maximum of 6 taps required.

 

[Callan]

Here's one I have setup for my PRS HBii with dual outputs (mag + piezo).
no drive pedals, but I use a control switch for the in amp-block drives.

Scenes 1 & 2 are AMP1-A (Hook 1A), scene 2 adds PEQ and delay.
Scenes 3 & 4 are AMP1-B (Hook 3B) same as above
Piezo is switched via the guitar mini toggle.