Scenes and Preset navigation question

cragginshred

cragginshred

Fractal Fanatic
Original question was why when I bank up is it jumping so many pre sets but @iaresee answered my question so I up dated my YT vid to be a quick help!

Heres the updated video for anyone who might need help

 
Last edited:
I think I got what you were asking the video. Let me take a stab at it...

Tap = activate the preset in the bank that's labeled on the switch
Hold = increase the bank (and change all the preset labels on the switches)

When you first entered preset mode the switch tap functions were:
  • Switch 1: Activate Preset 3
  • Switch 2: Activate Preset 4
  • Switch 3: Activate Preset 5

Then you held down switch 3 which "banked up" to the next bank of three presets making the switch tap functions:
  • Switch 1: Activate Preset 6
  • Switch 2: Activate Preset 7
  • Switch 3: Activate Preset 8

Once a preset is activated, as you did after holding switch 3 and then tapping to to activate Preset 8, tapping that preset switch again does nothing (unless you have preset revert on on PC# on) because the preset is already the active preset.

Clearer?
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom