Problem with Behringer FCB1010 connected to Axe-Fx II

Miguel Braz

Miguel Braz

Member
Hi All,

I connected a midi pedal board - Behringer FCB1010 to change presets in Axe-Fx II.
When i choose another preset, Axe-Fx becomes mute, despite metering the input leds. No sound is coming out neither from the phones or output1
Only solution is to switch off and on to have sound again.
Anyone have idea of what is causing this ? I would really like to control the Axe-Fx with this external controller.

Thanks.
 
The FCB is probably sending 0 value for Input Volume or Output 1 Volume CC#. Did you try moving the expression pedals after this occurs?

Setting those volume items to "none" in the Axe-FX I/O: CTRL menu should prevent this. Alternatively you could locate and remove/change the problem CC on the FCB1010.
 
You really need to know what MIDI msgs are being sent. If you use WIndows, download MIDIOX. It's old but will still work under Win 10. Use it to display the MIDi msgs the FCB is sending and then look up what they are set to do in your Axe/Fx II. h
 
You must log in or register to reply here.
Back
Top Bottom