Power adapter "phantom power" axe2

F

feliperigby

Inspired
Anyone know the correct plug and adapter to use in the axe-fx2 phanton power? To send power throught the midi cable to the mfc101?

Thanks
 
With the Axe II, you can use a standard ethernet/CAT5 cable connected to the expansion port of the MFC instead of a MIDI cable.
 
I know that but my ethernet/cat5 is not so stable when plugged in.

In a live situation it will cut the power off If someone hit the cable or something like that.
So I'm looking for the midi to use like..
 
2.5mm 1000ma i believe (from memory). mine got fried somehow, and i didnt go over the limit, used the same one i've used for years, and it cooked it. I had to build a pass through box that pushes power out to my liquid foot jr.
 
The mfc power adapter works best, plugged into the phantom in axe 2 and connecting mfc via 7 core midi cable. The power adapter has an output of 9 volt at 1000mA but take note of this,

AC ouput and NOT DC like most other adapters.
 
You must log in or register to reply here.
Back
Top Bottom