Bug? pop click noise with Griddle Cake when changing Drive block channel (video)

[overture1922]

​

Firmware 6.01 beta 2. The same occurs with the 6.0 version.

 

[jordikt]

Is it only happening in one preset?
Do you hear the same noises if you change the channels with the footswitches of the FM3?
Can you upload the preset of the video?

 

[Randalljax]

Firmware v6.0​

​

What’s the level at are they all equal?
Some drives will appear be louder
Check the level of each individual drive model and back off if one is louder
Also is it happening on just one channel , the other 2 are ok ?

 

[overture1922]

Is it only happening in one preset?

No. I copied the drive block to other presets and the problem persists.

Do you hear the same noises if you change the channels with the footswitches of the FM3?

Yes.

Can you upload the preset of the video?

Yes.

 

[overture1922]

What’s the level at are they all equal?

They are more or less on the same level. The noise happens even without the guitar cable connected.

Also is it happening on just one channel , the other 2 are ok ?

It happens mostly from channels B to C. From A to D it does not happen.

 

[overture1922]

It is strange, but I swapped the Griddle Cake on channel B for other pedal and the problem disappeared.

I tested putting in the Griddle Cake on other presets and this particular pedal is causing this problem.

 

[chme]

I have also noticed this kind of poping noise when switching drive channel to/from the griddle cake. FW 6.0

 

[chme]

Same problem with FW 6.01 b3 and the Griddle Cake. Switch between drive channel D and C with the preset attached

 

[skolacki]

Same problem with FW 6.01 b3 and the Griddle Cake. Switch between drive channel D and C with the preset attached

You should post this in the beta thread.

 

[overture1922]

You should post this in the beta thread.

rgrl is already informed.

 

[rglr]

Yep, thought I had this sorted. Will take another look.