Out to FoH Question

[Willis]

I go out of Output 1 to FOH & monitors, and I just crank the Out 1 knob all the way up. I let the FOH & monitor engineers trim the inputs of their consoles if needed. I've never been told that the signal is too hot. I go out of Output 2 to backline and set that at 12 o'clock. I can turn that up or down as needed to get my backline volume right.

 

[Brian Coonan]

Sorry Brian. I am recovering from a spinal tap. I meant 11 o'clock.

Haha...I totally was thinking that too!

 

[Brian Coonan]

When connecting direct to the board I keep Out 1 at about 9-10 o'clock. When I connect to my DI first I can set it much higher.

Thanks @bishop5150 - You sound great in your vids so that is nice to know what you have your out set to...

 

[Brian Coonan]

I go out of Output 1 to FOH & monitors, and I just crank the Out 1 knob all the way up. I let the FOH & monitor engineers trim the inputs of their consoles if needed. I've never been told that the signal is too hot. I go out of Output 2 to backline and set that at 12 o'clock. I can turn that up or down as needed to get my backline volume right.

Awesome - thanks @Willis

 

[brokenvail]

Thanks @brokenvail - I'll get familiar with that option as well just so I'm prepared.

It is very simple. Hit shift then set up, highlight i/o and hit enter page over to output and change the +4 to -10 and your are all set.