Most shallow case for an Axe-FX II?

[RobMFX]

Yeah I saw them too, but their cases look heavy. I'm not looking for a heavy duty case. Preferably medium duty, but even light duty would be OK. These are big heavy cases, based on the dimensions and weights. Of course, 2U isn't bad either way but I'm looking for a 6U.

Would this work?

http://www.roadcasesusa.com/6-space-6u-16-deep-1-4-ply-ata-amp-rack-case-closeout/

-6U
-Medium Duty

 

[mbrown3]

Would this work?

6 Space 6u 16" Deep 1/4" Ply ATA Amp Rack Case - CLOSEOUT! - Road Cases USA

-6U
-Medium Duty

Only has front rails. I need back too.

 

[RobMFX]

Only has front rails. I need back too.

http://www.guitarcenter.com/Raxxess-Rack-Rails--Pair--100996115-i1427116.gc?country=us&currency=usd&isfullsite=1&source=4WWRWXGP&gclid=CNHYx_y7ssQCFQMT7AodxVIAAQ&kwid=productads-plaid^87661142082-sku^500307.001.499@ADL4GC-adType^PLA-device^c-adid^44639487282&nce=1

 

[mbrown3]

http://www.guitarcenter.com/Raxxess-Rack-Rails--Pair--100996115-i1427116.gc?country=us¤cy=usd&isfullsite=1&source=4WWRWXGP&gclid=CNHYx_y7ssQCFQMT7AodxVIAAQ&kwid=productads-plaid^87661142082-sku^500307.001.499@ADL4GC-adType^PLA-device^c-adid^44639487282&nce=1

Thanks, but trying not to have to make hardware adjustments. I think I found an option. Should arrive Friday. This will be my third try, though, so time will tell.

 

[RobMFX]

Thanks, but trying not to have to make hardware adjustments. I think I found an option. Should arrive Friday. This will be my third try, though, so time will tell.

Cool hope it works out!

 

[rockridge98]

Thanks for all the tips!!

 

[rockridge98]

OK, I'm looking at the specs on the Gator GR-RACKBAG-3U and GRB-3U. The inside depth on the Rackbag is listed as 12.5 and the GRB as 14.
With the stated depth of the Axe-FX of 14.25 I'm assuming only the GRB will work, but the Rackbag has an outside depth of 12.5.
Has anybody tried putting an Axe in a Rackbag?

 

[rockridge98]

Just got my Gator Rackbag (the shallower one). Pretty tight in the back but does fit with right angle plugs.
For the little amount that I travel with my Axe-FX its OK, but if I was gigging every week I'd probably want the GRB bag or a case instead,
as I'd be worried about accidentally damaging the back of the Axe-FX.

 

[arstocker]

OK so I can't seem to find a suitable rack case myself. Here's what I'm looking for:

Either a 6U standard case, must have front and rear rails and a flat bottom, or a 4U rack bag with a pocket big enough to hold the MFC. I don't care about weight as much, but must have the smallest possible footprint. Also I want to keep things plugged in all the time so I'm looking for 16 to 18" depth. Going to 20 isn't a huge deal but again, smallest footprint.

I first tried the SKB rolling 6U and that thing is redonculously big. Then I got a Gator but the way it's molded doesn't allow me to secure the MFC in the bottom of it.

Any suggestions?

Check this one out from EWI Cases R6UE-14 | 6 space x 14" rack depth 2 Lid Effects or Amp Rack Case. I have their 4U 14" version and everything stays connected without having to use right angle cords. They have other cases too depending on the height and length you want (RUE Series Rack Cases).