That is what comes next!Great!
I'm REALLY intrested in the new 2024 +PlusPack for my FM3.
Any news about that?
That is what comes next!Great!
I'm REALLY intrested in the new 2024 +PlusPack for my FM3.
Any news about that?
is the EVH stealth in any of these presets?
Is the plus pack out now? I haven't been following but my money is ready!Hi @clags - the short answer is yes. The EVH Stealth models are a new Fractal-added amp in 2023 (like the Revv Gen and others).
Starting this year, all new amp models (where I have to make a new preset(s), and may use DynaCabs for those) won't be found in LiveGold or Naked Amps, they are gonna be in the 2024 +PlusPack.
I'll still update the existing amp models in LiveGold and Naked Amps for free at least once annually.
But any new amps from now on are gonna be found in the +PlusPack.
I'm about to add the Vox Brilliant model to that and get a +PlusPack update out for new firmware in the next week or two...
Yes. I have the FM3 +PlusPack version now available now, with the caveat that it was saved under the new firmware 8 but was made on Feb. 2023 fw 24 Axe-Fx III presets - but it sounds fine so far from all reports.Is the plus pack out now? I haven't been following but my money is ready!
Having this issue here when loading an item from the pluspack - no sound output from cab. Cab picker is garbled. Not sure if this is reported in another thread.Yes. I have the FM3 +PlusPack version now available now, with the caveat that it was saved under the new firmware 8 but was made on Feb. 2023 fw 24 Axe-Fx III presets - but it sounds fine so far from all reports.
Will have the latest firmware updated versions ready from all three units (checked all presets) within the next two weeks and loaded up for zip downloads.
Hi @clags ā Hmmm. Did you also update the editor to latest version when you updated firmware? This l ooks like an editor issue, not preset one? Definately close the doctor and re-boot everything and see if it happens again. No one else has report this. Iām updating those +PlusPack new amp LiveGold presets to CX3 now in fact in Bank 2 (then will tackle +PlusPack Bank 1) updating ā didnāt;āt have any issues on the III with that amp.Having this issue here when loading an item from the pluspack - no sound output from cab. Cab picker is garbled. Not sure if this is reported in another thread.
Hi @claggView attachment 139286
I'll check when I get home, I recall getting a prompt to update FM9 edit a week or so ago but it may be possible I haven't updated my firmware to the latest yet too.Hi @clags ā Hmmm. Did you also update the editor to latest version when you updated firmware? This l ooks like an editor issue, not preset one? Definately close the doctor and re-boot everything and see if it happens again. No one else has report this. Iām updating those +PlusPack new amp LiveGold presets to CX3 now in fact in Bank 2 (then will tackle +PlusPack Bank 1) updating ā didnāt;āt have any issues on the III with that amp.
Make sure to do Refresh After New Firmware too.I'll check when I get home, I recall getting a prompt to update FM9 edit a week or so ago but it may be possible I haven't updated my firmware to the latest yet too.
@Joshua_L - thank you so much for that, those kinds of kudos really sustain my work!So I downloaded the Marshall update for the FM3...
And that's just UNBELIEVABLE.... I just spent 3 hours non stop playing auditioning the Marshalls. It's like this update was made for you to show your tone talents.
Congrats it's an amazing work.
I just can't wait for the +PlusPack for the fm3, would love to see your take on the 2203 high and low!
I just bought the pluspack for the fm3 . Canāt wait to try those clean with my tele and the 2203!@Joshua_L - thank you so much for that, those kinds of kudos really sustain my work!
Cliff and company really deserve a lot of the credit. The firmware is so accurate and great now, itās never been easier to dial in the precise tones to have in your head now. Of course my 10,000+ hours of practice doing this dialing-in stuff since 2010 hasnāt hurt either!
On the +FM3 version of the +PlusPackā¦Iām just finishing up Bank 2 (the new amps) of the +PlusPack on my III that will port over to the FM9 and FM3ā¦ making a few adjustments to the EVH model, and had to re-level the RevGenns a little and cut the presence, but that all sounds killer. The 22023/2204 really didn't need anything new.
Will next week start the Bank 1 Cleans for +PlusPack for Cygnus X3, but you can get the FM3 version NOW that is made/saved under CX2 and it WILL work under CX3, and within the next 7-10 days I will update the +PlusPack TonePack to CX3 for all three hardware units to CX3 for download from accounts. Then rest of May Iāll work on LiveGold Banks 2 and 3 and then 200+ Bass. I want to get Mark Holcomb of Periphery over for his presets in Bank 3 LiveGold. - and maybe do an āThat AustinBuddy TonePack Showā with Mark ā but heās on tour all of May so it may be June before LiveGold Bank 3 gets completely doneā¦ I need he and his guitar to do his presets, my SG doesnāt work for those.
The +PlusPack will only be on sale until May 31st, then price goes to $79 normal one rest of the yearā¦so that is some incentive to get it /buy now/by end of May, and start enjoying it with updates coming before mid-May.
Glad you love those Marshall style tones in LiveGold bank 1! Check out the Captain Hook 34, am once again in love with that ampā¦
All I can say is I am working on it. Instead of making yaāll wait for the whole thing together, I do the partial bank updates. I have to listen/play every preset to make sure the new firmware didnāt change it. That takes time and I canāt do it non-stop because of ear fatigue.Hey Buddy, any idea when the other 2 banks will be updated for FM9 LiveGold pack? Then the whole thing will be complete?
Awesome. Let me know if any amp volumes are off as you play through it?I just bought the pluspack for the fm3 . Canāt wait to try those clean with my tele and the 2203!
Update here - turns out I hadn't updated my FM9 to the most recent firmware. Firmware and dynacabs update fixed the issue.Hi @clags ā Hmmm. Did you also update the editor to latest version when you updated firmware? This l ooks like an editor issue, not preset one? Definately close the doctor and re-boot everything and see if it happens again. No one else has report this. Iām updating those +PlusPack new amp LiveGold presets to CX3 now in fact in Bank 2 (then will tackle +PlusPack Bank 1) updating ā didnāt;āt have any issues on the III with that amp.
You're doing great work!All I can say is I am working on it. Instead of making yaāll wait for the whole thing together, I do the partial bank updates. I have to listen/play every preset to make sure the new firmware didnāt change it. That takes time and I canāt do it non-stop because of ear fatigue.
So far though the presets made last year but running under firmware 25/latest sound very good and most as intended. I fiddle with levels if needed and gain and maybe EQ but nothing else. But then Iāll run into an amp that needs more work - Freyette changed a bit for example, the ācrackā scene didnāt crack and had to re-work it.
It should all be done by/in June. Maybe before. Iāll know more in about two weeks. Iāll put up Bank 2 when itās ready. I cancelled trips away from the studio and I am in there 8 hours a day working on various TonePack or video stuff.