brianv4
Fractal Fanatic
For those still trying to figure this out I thought I'd share the info and sysex files.
I'm including 3 files; AxeFx system file, MFC sysex file and preset # 2, 65 Bassguy. Load 'em up and it should all work - Presets, Bank Up/Down, Scenes 1-5, IA's 5-10, Tap and Tune, Wah and Output Volume.
Once you see how things were setup, edit to your own preferences.
Scenes 1-5, cc#127 (values 0,1,2,3,4)
Tuner, cc#126
Tap, cc#125
(Lights for scenes will flash on when you stomp then go out)
EDIT: Forgot to mention Switch # 5 is set to toggle between Scene 5 + 6 so you can use it for Rhythm/Lead or Lead1/Lead 2 etc. Effectively giving you 6 scenes on 5 buttons.
IA's:
Drive 1, cc#6
Drive 2, cc#7
Chorus+PlexDelay, cc#8
Delay 1, cc#9
Reverb 1, cc#10
Comp 1, cc#11
Flanger 1, cc#12
Phaser 1, cc#13
Rotary 1, cc#14
Pitch 1, cc#15
(Lights will stay on when engaged, I used cc#'s to correspond to the switch # to make it easier to remember)
Ext Controllers:
Wah 1, cc#18 (Ext 1)
Volume, cc#19 (Ext 2)
Unfortunately, I haven't found a way to get the MFC to toggle to Looper mode yet. Not sure if it's possible the way I'm configured.
I'm including 3 files; AxeFx system file, MFC sysex file and preset # 2, 65 Bassguy. Load 'em up and it should all work - Presets, Bank Up/Down, Scenes 1-5, IA's 5-10, Tap and Tune, Wah and Output Volume.
Once you see how things were setup, edit to your own preferences.
Scenes 1-5, cc#127 (values 0,1,2,3,4)
Tuner, cc#126
Tap, cc#125
(Lights for scenes will flash on when you stomp then go out)
EDIT: Forgot to mention Switch # 5 is set to toggle between Scene 5 + 6 so you can use it for Rhythm/Lead or Lead1/Lead 2 etc. Effectively giving you 6 scenes on 5 buttons.
IA's:
Drive 1, cc#6
Drive 2, cc#7
Chorus+PlexDelay, cc#8
Delay 1, cc#9
Reverb 1, cc#10
Comp 1, cc#11
Flanger 1, cc#12
Phaser 1, cc#13
Rotary 1, cc#14
Pitch 1, cc#15
(Lights will stay on when engaged, I used cc#'s to correspond to the switch # to make it easier to remember)
Ext Controllers:
Wah 1, cc#18 (Ext 1)
Volume, cc#19 (Ext 2)
Unfortunately, I haven't found a way to get the MFC to toggle to Looper mode yet. Not sure if it's possible the way I'm configured.
Attachments
Last edited: