musicman61554
Inspired
Axe-Fx II (mark II) v15.02
MFC-101 (mark III) v3.02
USB Adaptor Mode = on
Send Real-time Sysex = none
Connected MIDI out from Axe to MIDI in on MFC
Pressed and held switch #1 on MFC
Turned on Axe
"FW UPDATE MODE" displayed and never updates. I did exactly what Diego has said "You must turn everything off before disconnecting the Ethernet / Ethercon cable. Then power up the Axe, wait till it's full on, set as described in the manual (it becomes a MIDI device: USB Adaptor Mode = on , Send Real-time Sysex = none), connect the power adapter to the MFC and while you do this hold on footswitch #1: this put the MFC in UPDATE MODE. Connect a 5 pin MIDI to Axe-Fx MIDI Out e MFC MIDI In then transmit the FW with Fractal-Bot. This is the "safe" mode to update" and still nothing is updating. I dont get an error or anything the MFC just displays "FW Update Mode". I tried 2 different cables that I know work because I use them with my keyboard. Any suggestions.
MFC-101 (mark III) v3.02
USB Adaptor Mode = on
Send Real-time Sysex = none
Connected MIDI out from Axe to MIDI in on MFC
Pressed and held switch #1 on MFC
Turned on Axe
"FW UPDATE MODE" displayed and never updates. I did exactly what Diego has said "You must turn everything off before disconnecting the Ethernet / Ethercon cable. Then power up the Axe, wait till it's full on, set as described in the manual (it becomes a MIDI device: USB Adaptor Mode = on , Send Real-time Sysex = none), connect the power adapter to the MFC and while you do this hold on footswitch #1: this put the MFC in UPDATE MODE. Connect a 5 pin MIDI to Axe-Fx MIDI Out e MFC MIDI In then transmit the FW with Fractal-Bot. This is the "safe" mode to update" and still nothing is updating. I dont get an error or anything the MFC just displays "FW Update Mode". I tried 2 different cables that I know work because I use them with my keyboard. Any suggestions.