Going stereo with AX8-Edit

[Fernando Laserra]

Hey guys, I've just bought the AX8 and I'm loving it.
One thing I couldn't use properly is playing stereo and that's why I'm here and I'd appreciate your help with that.

So my rig is: Guitar > AX8 > 2 cables XLR into the front panel of my Scarlett 2i2 1st gen > going to my pair of M-Audio BX5.

I'm following the tips of you guys using the effect blocks after the amp/cabinet, and also the cabinet and AX8 configurations are select as 'stereo', but I don't feel the stereo for instance using ping-pong delay or any other stereo effect.

When I turn the knob up/down on my channel 01 'gain 01' on the scarlett, it doesnt change just one speaker, it seems they are summed. Maybe it's a dumb issue but I'm no pro on this.

Thanks in advance.

 

[Geezerjohn]

Check the output to determine how output 1 is configured. It should be set to stereo.

 

[Moke]

Try making sure that the two Scarlet inputs are panned hard left and right.

 

[Sonofiam]

I don't believe the Scarlett 2i2 is configured to monitor in stereo. You'll need to run the AX8 into a DAW / recording software and configure it for stereo there. If you're not recording, you can connect the AX8 directly to your monitors using the XLRs.

 

[chris]

The 2i2 cannot pan it’s inputs. FWIW this has nothing to do with AX8-Edit.