Gallien Krueger NEO 112 UltraRes IRs captured with a Blue Yeti Pro (Cardioid)

[maschoff]

Here are some IRs I captured today with a Blue Yeti Pro microphone through a Mackie Onyx 1220i mixer. The cab was powered by a Matrix GT1500FX. I captured the cap, capedge, horn and port. These should be good for mixing once CabLab is up a running but the cap and capedge are useful now. Picture shows Stereo but these were captured in Cardioid mode.

Here's the frequency response of the Yeti Pro:

Let me know your thoughts and suggestions cause this is going back to the store soon ... Bergantino HD112 IRs coming soon to a post near you!!!

 

[SeeD]

cool,i will try them out tomorow

 

[maschoff]

Cool, I posted the Bergantino HD112s too. Check them out and let me know what you think. With my FRFR solution, 17.5% room makes them sound pretty close, everything else set normally.

 

[maschoff]

Ok, so I played around with mic position and levels. These are all captured at the port with varying levels of the horn via the dial on the back of the cab.

Gallien Krueger NEO 112 UltraRes IRs captured with a Blue Yeti Pro (Cardioid)

Let me know your thoughts

 

[schnick-schnack]

Thank you for sharing

 

[wiz_2112]

Cool, I posted the Bergantino HD112s too. Check them out and let me know what you think. With my FRFR solution, 17.5% room makes them sound pretty close, everything else set normally.

thanks!!! what FRFR cab are you using?