Luis Robles
Member
There are probably a few of you out there with Mission pedals for line 6 equipment. After some looking around I found on the MFC thread here somewhere, a post where it was possible to mod the EP1-L6 to use as an expression pedal for Fractal equipment. The mod is really simple and it works great. There are 3 wires connected to 2 lugs of the jack. Black is on one lug and the Red and Green are together on another lug. The jack has 3 lugs with one lug not being used. So what you do is separate the Red and Green wires that are connected together on one lug and solder each to its own separate lug. So you end up with one wire per lug. You will need to use a TRS cable when you connect it to the FX8. Since I still need to use the pedal with my Line 6 gear I added a mini toggle switch so that I can switch modes. I hope this helps someone.
Note: Just in case, I want to be clear. I don't take credit for the mod, I read it here in a thread. I'll only take credit for the mini switch.
Note: Just in case, I want to be clear. I don't take credit for the mod, I read it here in a thread. I'll only take credit for the mini switch.
