FM3 power failure during FW upgrade

[scott.frank.b]

I was just attempting to update my FM3 to FW 9.0 and now I have a complete power failure on the unit. It will not power on at all. It was working prior to the FW upgrade attempt and it appears that it was only about 22% through the upgrade.

 

[iaresee]

https://support.fractalaudio.com is the place to get help with this

Edit: You can also try this but if it's not powering up, that's a matter for support.

https://wiki.fractalaudio.com/wiki/index.php?title=Firmware#Emergency_boot_recovery

Hold down PAGE LEFT and PAGE RIGHT while cycling power until the Emergency Utility menu appears. Update the firmware using Fractal-Bot.

See also this article on the support site: https://support.fractalaudio.com/en-US/recovery-routines-286533

 

[mr_fender]

Check the manual for the Emergency Boot Loader instructions under Recovery.

 

[Rex]

If it’s not powering on at all, you’ve almost certainly got a bad power connection. Reseat both ends of the power cord, and make sure that whatever you’re plugging into is actually receiving power.