FM3 Factory Presets for Firmware 10.0

I wish to know this as well.....

Do these include all those GoT presets that the Axe 3 and FM9 got for bank C?!? Sorry if this has been asked but I didn’t see anyone confirm if that’s the case.
 
flarocks said:
I wish to know this as well.....

Do these include all those GoT presets that the Axe 3 and FM9 got for bank C?!? Sorry if this has been asked but I didn’t see anyone confirm if that’s the case.
Click to expand...

If you look at the video that @Admin M@ posted above your comment and watch as he scrolls through the list, you'll see a bunch of GoT presets as well toward the end of the list.

Besides, all of the GoT presets are available for free on fractal website and you can download them anytime.
 
Admin M@ said:
Yes, easily. I made you this video.

Click to expand...

Thanks for the video! Did exactly what I wanted except it got stuck saving Horrorfest FM3. The FM3 froze saving it. I had to cycle power on the FM3. It did it twice so I skipped that preset and saved the rest. It froze again when I tried doing just Horrorfest FM3. When I go to Manage Presets and tried to clear it and then save, the FM3 switched to that preset and locked up again. Everything else seems to function normal.
 
blaide said:
Thanks for the video! Did exactly what I wanted except it got stuck saving Horrorfest FM3. The FM3 froze saving it. I had to cycle power on the FM3. It did it twice so I skipped that preset and saved the rest. It froze again when I tried doing just Horrorfest FM3. When I go to Manage Presets and tried to clear it and then save, the FM3 switched to that preset and locked up again. Everything else seems to function normal.
Click to expand...
same here, having the same issue with horrorfest preset. All other presets seems fine
 
I installed new presets via Fractal Bot and the sound from my guitar is gone. Presets are not working even my own. Playback is working only on empty preset, when i load any of them all sound from the unit is gone.
However meters on input are showing changes when i play on plugged in guitar.

EDIT: Ok, It is working now, needed to reboot the unit.
 
Last edited:
I'm use to presets being mostly useless, but I have to say, some of these presets are very impressive. Nice work FAS and contributors.
 
I am confused. As to these presets, you warn that they could increase cpu usage to over 80% on non-turbo FM3's. Based on this warning, are you basically saying these new presets are not recommended for the non-turbo FM3? I am running the most current beta, 9.03 and it feels like this beta update is pushing us into territory where the non-turbo FM3 really can't be upgraded. Put another way, like with older Apple computers, it seems like the updates are moving beyond the capabilities of the non-turbo FM3 and basically not supported. Is Firmware 10 beta not recommended for non-turbo FM3's.
 
SpudMan said:
I am confused. As to these presets, you warn that they could increase cpu usage to over 80% on non-turbo FM3's. Based on this warning, are you basically saying these new presets are not recommended for the non-turbo FM3? I am running the most current beta, 9.03 and it feels like this beta update is pushing us into territory where the non-turbo FM3 really can't be upgraded. Put another way, like with older Apple computers, it seems like the updates are moving beyond the capabilities of the non-turbo FM3 and basically not supported. Is Firmware 10 beta not recommended for non-turbo FM3's.
Click to expand...
You read it backwards
 
I see there are duplicate preset names when I scan through this download for fw10 Beta. Are there any differences between these duplicate preset names?
 
SpudMan said:
I am confused. As to these presets, you warn that they could increase cpu usage to over 80% on non-turbo FM3's. Based on this warning, are you basically saying these new presets are not recommended for the non-turbo FM3? I am running the most current beta, 9.03 and it feels like this beta update is pushing us into territory where the non-turbo FM3 really can't be upgraded. Put another way, like with older Apple computers, it seems like the updates are moving beyond the capabilities of the non-turbo FM3 and basically not supported. Is Firmware 10 beta not recommended for non-turbo FM3's.
Click to expand...
To clear up confusion I added emphasis on the important parts below:
Admin M@ said:
Older Factory Presets may exceed 80% CPU usage, especially on the standard (non-Turbo) FM3. These new presets are therefore recommended for anyone running firmware 10.0 or newer.
Click to expand...
 
SpudMan said:
I am confused. As to these presets, you warn that they could increase cpu usage to over 80% on non-turbo FM3's. Based on this warning, are you basically saying these new presets are not recommended for the non-turbo FM3? I am running the most current beta, 9.03 and it feels like this beta update is pushing us into territory where the non-turbo FM3 really can't be upgraded. Put another way, like with older Apple computers, it seems like the updates are moving beyond the capabilities of the non-turbo FM3 and basically not supported. Is Firmware 10 beta not recommended for non-turbo FM3's.
Click to expand...
These presets are actually tweaked so they are useable on the current FM3 that’s one of the reasons for them so you don’t hit the limits
It’s the old factory presets or the user presets that are hitting limits depending on blocks and settings
 
when you guys say, we've made significant improvements to the sound and performance, if you've improved the performance in fw10, is it from things like the reverb/spring plate new algorithms that are making the FM3 struggle CPU wise?

not a criticism, by any means, I truly appreciate the effort you guys put into it all. thank you.
 
I am a new user of the FM3. The USB recording no longer worked since the Sequoia update, so I downloaded the firmware 10 beta and the new factory presets. I found big differences in volume between the presets and especially a lot of digital clipping on presets which was not the case before (block cab volume too loud?) Do you have the same impressions? I assume that this will be fixed with the updated updates
? Thanks
 
Is there a way to select the wah off value 95%, globally for all presets? I had changed this value manually for all presets in the factory presets.
 
You must log in or register to reply here.
Back
Top Bottom