fuzzyoctaves
Inspired
I am experiencing two problems that are compounding each other:
Problem 1: The expression calibration seems off. I've tested it with 3 different pedals:
a. Mission Ep-1 spring loaded - The first 1/8th and the last 1/16th of travel don't register in AxeEdit
b. Mission Ep-1 - The last 1/16th of travel doesn't register in AxeEdit
c. Dunlop DVP3 - The first 1/8th and the last 1/16th of travel don't register in AxeEdit
Problem 2: I am realizing that my auto engage settings for the block bypass aren't right as the Wah block keeps cutting out in AxeEdit. With the bypass set to slow pos, it is only turning on at 50% of the travel on pedal a above. If I dip below 50% for less than a second, the block bypasses.
Much thanks for any help.
Here is a screenshot of the settings:
Problem 1: The expression calibration seems off. I've tested it with 3 different pedals:
a. Mission Ep-1 spring loaded - The first 1/8th and the last 1/16th of travel don't register in AxeEdit
b. Mission Ep-1 - The last 1/16th of travel doesn't register in AxeEdit
c. Dunlop DVP3 - The first 1/8th and the last 1/16th of travel don't register in AxeEdit
Problem 2: I am realizing that my auto engage settings for the block bypass aren't right as the Wah block keeps cutting out in AxeEdit. With the bypass set to slow pos, it is only turning on at 50% of the travel on pedal a above. If I dip below 50% for less than a second, the block bypasses.
Much thanks for any help.
Here is a screenshot of the settings: