Dual Delay loses one of the delays when using IN3

[Dregsman]

So I use out3 in3 to loop in a dirt pedal. This is befoe my delays. When I turn on the in3 to get the pedal in the signal the dual delay loses the 1/8dot side and I cant figure out why.

 

[Greg Ferguson]

Export the preset and attach it to your post. The screenshot doesn’t help us see inside the various blocks.

 

[Bakerman]

In the I/O: Audio menu check if Input 3 Mode is "left only". Having it set to stereo would cause what you described with a mono pedal connected to In 3L.

 

[Dregsman]

I attached the preset to the post so you

Export the preset and attach it to your post. The screenshot doesn’t help us see inside the various blocks.

 

[Greg Ferguson]

I attached the preset to the post so you

Looking at the preset I don't see anything that would be causing a dropout, so I'd look into what @Bakerman suggested.

 

[Dregsman]

In the I/O: Audio menu check if Input 3 Mode is "left only". Having it set to stereo would cause what you described with a mono pedal connected to In 3L.

no its stereo.

In the I/O: Audio menu check if Input 3 Mode is "left only". Having it set to stereo would cause what you described with a mono pedal connected to In 3L.

ok I set input 3 mode to left only and that fixed it. Thx so much!