Wish Deactivate the hardware output level controlls

[dershaven]

Would be great if I can deactivate one or all Outout-Level Controls on the Hardware and set it to a fixed value in
the software

 

[mr_fender]

Tape the knobs full up with a strip of gaffer's tape, then use the level control in the Global EQ for each output.

 

[unix-guy]

Or buy lock knobs…

 

[dershaven]

Tape the knobs full up with a strip of gaffer's tape, then use the level control in the Global EQ for each output.

That's the way I do it now, but I thing it would be very easy to implement this function, like other units do.

 

[unix-guy]

That's the way I do it now, but I thing it would be very easy to implement this function, like other units do.

I'm pretty sure the output knobs are analog so I suspect that's impossible...

 

[dershaven]

I'm pretty sure the output knobs are analog so I suspect that's impossible...

Ah - good to know! Thank you!

 

[Stratman68]

Or buy lock knobs…

@unix-guy - What are these?

 

[Stratman68]

Tape the knobs full up with a strip of gaffer's tape, then use the level control in the Global EQ for each output.

@mr_fender - do we know where most people put the out 1&2 knobs? I know it's been discussed before many times.I have mine at 12 noon.
Good? Bad? Doesn't matter?
Thanks

 

[unix-guy]

@unix-guy - What are these?

Replacement knobs that have a way to lock the position once adjusted.

https://www.daddario.com/products/a...fOX4rO9JJe4W_1aovEOPvyZHhwiu_JyYYDmQa8s9mvWlO

These actually look interesting, too:

https://www.peacepoti.com/?srsltid=AfmBOopbPnUr3rpkesgbdQvStdhyKj9LpfZhtaT1MTtruWDclRAj4Phv

 

[mr_fender]

Out knob settings depend on your level on the grid and if the outputs are set to +4 dBu or -10 dBV line level. IIRC, when set to +4 dBu and running a 0 dB level on the Out block meter, you'll get +4 dBu RMS output level at around 3 o'clock on the OUT knob.

 

[Stratman68]

Out knob settings depend on your level on the grid and if the outputs are set to +4 dBu or -10 dBV line level. IIRC, when set to +4 dBu and running a 0 dB level on the Out block meter, you'll get +4 dBu RMS output level at around 3 o'clock on the OUT knob.

Thanks- Appreciate the info.........

 

[Stratman68]

Replacement knobs that have a way to lock the position once adjusted.

https://www.daddario.com/products/a...fOX4rO9JJe4W_1aovEOPvyZHhwiu_JyYYDmQa8s9mvWlO

These actually look interesting, too:

https://www.peacepoti.com/?srsltid=AfmBOopbPnUr3rpkesgbdQvStdhyKj9LpfZhtaT1MTtruWDclRAj4Phv

Thanks! I'm going to try each one I mean they are really cheap.......................

 

[Stratman68]

Out knob settings depend on your level on the grid and if the outputs are set to +4 dBu or -10 dBV line level. IIRC, when set to +4 dBu and running a 0 dB level on the Out block meter, you'll get +4 dBu RMS output level at around 3 o'clock on the OUT knob.

Thanks - Appreciate it.......