Confused about CPU variation in identical presets

[Ocnor]

I made 2 presets using literally the exact same blocks [copied and pasted] but there is a variation in the amount of CPU usage between them. What am I missing?

 

[unix-guy]

Same number and types of controllers in both?

Same channels active in whatever scene(s) you're comparing?

 

[Ocnor]

No controllers and yes same channels.

 

[unix-guy]

Is one saved under an older firmware? Possible one or more blocks behave different when added under newer or older firmware.

 

[boardwlk17]

How about the quality of effects

 

[Ocnor]

They were both created using FW 24.05

 

[unix-guy]

How about the quality of effects

If the blocks were copy/paste then the settings should be identical...

 

[Ocnor]

How about the quality of effects

They are the exact same blocks

 

[DallasGlenn2005]

How big a difference?

 

[Ocnor]

How big a difference?

1 hits 67.6 % and the other hits 73.3 %

 

[unix-guy]

The channels are not the same assuming Scene1... I see about 3.5-4% differnce

 

[unix-guy]

The Drive block is different and different types use different CPU...

 

[Ocnor]

The channels are not the same assuming Scene1... I see about 3.5-4% differnce

Scene 3 is what I was comparing. You are right about the drive block. I don't know how I missed that. I must be getting senile in my old age.

 

[unix-guy]

Additionally, loading either of these presets into my Axe Fx causes the Output1/2 LEDS to max out and somewhat hang... Interestingly, I can still load other presets but get no sound... and the Cab block shows no cab selected - and the selection list is short and corrupt:

 

[Ocnor]

That's weird. I just downloaded them and they loaded up perfectly on my unit.

 

[unix-guy]

That's weird. I just downloaded them and they loaded up perfectly on my unit.

Weird!