AX8 Main out TRS not working

[vl1987]

AX8 TRS Jack Main Out Bug.
One day I found that one of main TRS isn't working. On stage I use XLR's, at home reserve OUT2 (FX Loop)
Today I had time and decided to solve that problem. Cause building at home presets though OUT2 Preferences make some troubles.
I gave it to professional master-electronic, and tought that was just mechanical damage of jack input or it's soldering.
But we found some problems on electronic parts
Resistors R65 и R68 and capacitor C48 damage.
Can any of support's give me just part of scheme? Only main outs?

Also question is there any program possibility to reassign OUT 2 Jacks as OUT1?
Or it attached to hardware part?

 

[ChristThePhone]

You might want to ask FAS support but I doubt they're going to disclose any schematic. Anyway, the resistor and capacitor values should be identical for left/right/tip/ring so you could derive them from the ones still alive

 

[ChristThePhone]

you can configure the AX8 to copy out 1 to out 2. As long as you don't use the FX block it would do what you need it to do, however, out 2 is not a symetric output but Humbuster

 

[unix-guy]

Yeah, contact support@fractalaudio.com... they may have parts in stock.

 

[dsouza]

If your AX8 is damaged I'd get it fixed by the folks at Fractal properly once and for all.

 

[vl1987]

Hello again. Problem was solved. Also found defective CPC1117N relay. Was replaced by analogue.
Looks like everything works.
By the way how to copy out1 to out2 without FX Block?

 

[ChristThePhone]

Hello again. Problem was solved. Also found defective CPC1117N relay. Was replaced by analogue.
Looks like everything works.
By the way how to copy out1 to out2 without FX Block?

Enter the IO setup menu, turn on Out 2 Echo (see manual p. 85)