Andy Eagle
Fractal Fanatic
The spacing is 10.8mm on the standard and 10.5mm on the narrow . Vintage strat is 11.2mm. The 10.8 is almost exactly the same as you have now.
What is the difference between the 510TS-FE1 vs 510T-FE1 . Is the S for shallow block? I do want the lower tension.The spacing is 10.8mm on the standard and 10.5mm on the narrow . Vintage strat is 11.2mm. The 10.8 is almost exactly the same as you have now.
Mine is a pop in tremolo. Still trying to understand the differences in the Gotohs. I play and setup my own guitars but I do not take them apart, well except for changing pickups now and then.My American Std Strat has those same offset screw saddles like that. Mine are slightly angled like that too. It's always bugged me aesthetically, but doesn't seem to cause any other issues. I've always been more irritated by the wobbly screw in tremolo arm in mine. It needs a bushing something awful.
2 7/32" is the spec'd stud spacing on Fender USA two post tremolos. It's the same spacing as the outer two screws on the 6 screw vintage tremolos.
The S is for Steel Block. That one is more traditionally shaped. https://g-gotoh.com/images/pdf/510TS-FE1-Dim.pdf
The 510T-FE1 has a zinc block with the angled slots. https://g-gotoh.com/images/pdf/510T-FE1-Dim.pdf
Both will require widening the Fender tremolo route a tiny bit on the treble side to fit around the nut that holds the trem arm socket in place. Doesn't take much and is not really visible once installed.