Acoustic Presets- Nylon/Steel Strings & with and w/o vox

[fireheart7]

Hello everyone,

Here are a couple of presets I have been working on.
Scene one- steel string guitar
Scene 2- Classical/nylon string

IRs are free from the web, saved as cab combo, hope those translate.

NOTE: Start with your output to zero as I had to bump gains to bring level up in VU meters/

CS1- reverb hold/"freeze"

VOX version allows you to input a mic straight to the line in use in parallel with your guitar.
Using that OD as a preamp was an idea I learned here from a fellow forum member (thanks!)

 

[NightWalker]

thank you for sharing those presets!!

 

[SHEPPARD]

Is it possible to get the cab separately?

 

[Thomas Enzmann]

Great Job Thank you

 

[Stratman68]

Is it possible to get the cab separately?

You can download the preset, that will give you the cab also. It will prompt you to save the cab somewhere in your user cabs. Just save it and use it where ever u like. If it doesn't prompt you, which would be weird, just see where the cab is saved. HT makes sense.

So you must load the preset in order to get the cab. You can always delete the preset after you save the cab .

 

[fireheart7]

Thank you stratman68 for explaining.
Sheppard- fyi, There are 2 different cabs X and Y on the preset. A steel stringed Taylor for scene and a nylon stringed for scene 2.

 

[Thomas Enzmann]

Great Job . Thanks

 

[fireheart7]

Great Job . Thanks

You're welcome! Glad you like it

 

[NightWalker]

those presets are for use with a Nylon/Steel Strings guitar?

 

[fireheart7]

those presets are for use with a Nylon/Steel Strings guitar?

Scene one for steel stringed.
Scene 2 for nylon.
That allows me to switch guitars with the least amount of switching.
You can bring the GEQ as needed.