Search results for query: *

  • Users: fdos
  • Order by date
  1. F

    FM3 Firmware Version 8.00 beta 1

    Not sure if it's a bug but for some of the new amps that were already there (e.g. Recto, Friedman etc), the volume of existing patches has dropped quite a bit. e.g. if i had a patch at level of -6.0db, i now have to turn it up to 0.0db to get it to sound as loud as earlier.
  2. F

    FM3 as effects pedal with Tonex pedal

    Thanks all for the responses. Update: The OUT2 config was set to Line out instead of Unity gain so that resolved that. However, playing Tonex pedal via FM3 still sounds different (darker, lack of top end) than just using Tonex pedal. To keep things simpler, I decided to use FM3 as just post...
  3. F

    FM3 as effects pedal with Tonex pedal

    Will do, thanks.
  4. F

    FM3 as effects pedal with Tonex pedal

    Thanks, but I don’t have any blocks engaged at the FM3.
  5. F

    FM3 as effects pedal with Tonex pedal

    Anyone?
  6. F

    FM3 as effects pedal with Tonex pedal

    Hey Team - trying to use the FM3 as an effects pedal with the Tonex pedal. So my config is guitar -> fm3-> fm3 send to tonex input -> tonex output to fm3 return -> headphones out of fm3 FM3 edit config is IN1 -> OUT2 (row 1), IN2 -> OUT1 (row 2) I have not added any effects yet. OUT2 knob...
  7. F

    FM3 - Impedance issue?

    The amount of distortion seems to be changing...edge of breakup tones sound clean and higher gain tones have lower gain....and yes output is lower as well...BTW this is using the same guitar as before...
  8. F

    FM3 - Impedance issue?

    So, lately my FM3 seems to have developed a weird issue...The amp output has decreased in the sense it feels as it someone dialed down the gain knob. Or as if I switched from a high output guitar to a low output and it takes a lot more to drive the amp. No settings have been changed...turned it...
  9. F

    Bug? S/PDIF Popping sound 1.04b7

    Has this been fixed? I am hearing pops via spdif into my Apollo Twin.
  10. F

    Not a Bug Output 2 as USB Interface

    So I set Output 2 copy to Output 1 in setup and connected the monitors directly to output 2. In setup, USB 3/4 Playback is set to Output 2 and Logic (DAW) output is set to Ouput3/4 as well. I can hear the guitar signal directly from FM3 into Monitors, however, I cannot hear the DAW playback via...
  11. F

    Output 2 as USB Interface output

    Thank you!
  12. F

    USB Out Issue

    Were you able to figure this out? For me, Output 1 works for USB playback but not Output 2. I am on Mac/Logic though.
  13. F

    Output 2 as USB Interface output

    Yes, I am using Logic...Sending to Output 3+4.
  14. F

    Output 2 as USB Interface output

    I set USB3/4 to Output 2 in Setup, however, still not hearing anything from Output 2.
  15. F

    Output 2 as USB Interface output

    So I set Output 2 copy to Output 1 in setup. By doing so I can hear the guitar output from Out1 while speakers are plugged into output 2, however, I cannot hear the DAW playback via USB. I can only hear that if I connect my monitors directly to output 1. Shouldn't the out1 settings get carried...
  16. F

    USB Recording Level

    Okay got this to work by boosting the output gain for the preset and lowering the level 1 knob so that my headphone output doesn't blow out my ears while hitting -12db in logic.
  17. F

    USB Recording Level

    i can increase the amp level, however, that also increases the headphone out level in my headphones.Can i achieve the balance via the output 1 knob or will that lower the usb recording as well? I guess I could test this when I am back at my desk.
  18. F

    USB Recording Level

    Received my FM3 earlier this (headphone version) and updated to firmware 1.06. I have a question on USB recording levels. When recording directly in logic via FM3 USB (Input 1-2), the guitar signal level (recorded) is very low. FM3 is connected directly to macbook and I am not using an...
  19. F

    AX8 True Bypass Best Practice

    Yells at others saying "what the hell does this have to do with the question being asked?"....can't read himself....
  20. F

    Anyway to record processed and DI using XLR?

    Okay I figured it out and posting or anyone looking for the same in the future. I guess there's two ways to do this but I prefer the 2nd option below as I don't have to split the signal L/R. 1) Using XLRs only: Send L XLR to Input 1 of interface and R XLR to Input 2. However, I believe, using...
  21. F

    Anyway to record processed and DI using XLR?

    Anyone?
  22. F

    Anyway to record processed and DI using XLR?

    Yes, thats what I meant
  23. F

    Anyway to record processed and DI using XLR?

    I tried recording processed and DI using spidf. Set Out 2 Echo to Input 1 in I/O. Then set a DI path on Out 1 and processed path on Out 2. Adjusted Out 1 and 2 to 100%L and 100%R in Output. In DAW, armed 2 tracks, one set to spidf signal L and other to spidf R. It works but the signal is too...
  24. F

    AX8 Using Effects in Reaper

    Assuming you are going from AX8 to an audio interface (that allows you to control mix balance between incoming signal vs computer playback signal) to computer 1) Arm your track in reaper to record (and put the EQ effect on it) 2) Turn on Monitoring on that track 3) Set the audio interface to...
  25. F

    What's the best AX8 amp alternative to Tonemaster?

    I will try this. Thanks!
  26. F

    What's the best AX8 amp alternative to Tonemaster?

    Anyone?
  27. F

    What's the best AX8 amp alternative to Tonemaster?

    As stated in the subject, what amp model in AX8 would be closest to a Fender Tonemaster? Thanks.
  28. F

    Any plans for a small stomp AX4?

    I already caught a bug in that one. Hardware says AX4 and Software says AX8. Please release a new version of software to fix that.
  29. F

    Monkey Wrench (Foo Fighters) guitar tone

    Hi, I am trying to get a tone similar to the verse in Monkey Wrench. I am using an Explorer (with Classic 57+ Bridge). I tried Mesa Red 1 but unable to get something I am happy with. I either get too much gain/fizz or a tone that has a very prominent pick noise. I am using the stock 4x12 Recto...
  30. F

    Digitech Trio+ Band Creator/Looper With AX8?

    Just got a trio plus and I tried this but the tone changes and not the same as without the trio. Did you (or anyone) experience the same?
  31. F

    Q10 Firmware for the AX8?

    I saw that and I am not trying to be contentious, simply asking for some level of visibility. I am sure a lot of other users would like the same. Again, some update on status is not too much to ask. Sounds like the repetitive message from users is “it will be ready when it is ready”. Is there a...
  32. F

    Q10 Firmware for the AX8?

    An update (other than "soon") from FAS would be really nice. I know I will get chewed out by some of you for simply asking but whatever.
  33. F

    Q10 Firmware for the AX8?

    So? ;)
  34. F

    AX8 Monitoring Levels

    I am not completely familiar with the 6i6 but I think one of the challenges with this interface is that it doesn't have a mix knob. On my interface (Tascam) I have a mix knob that allows me to balance the direct input into the interface (AX8 output) and the playback from the PC so that at 9'o...
  35. F

    AX8 presets sounding honky all of a sudden

    Thanks all, I reset the parameters and it seems to be fine now.
  36. F

    AX8 presets sounding honky all of a sudden

    Cab sims and power amp are on
  37. F

    AX8 presets sounding honky all of a sudden

    As of this evening, all of a sudden, my presets (especially ones with gain/distortion) are starting to sound very honky. Kind of like you added a weird reverb to it. Also, regular distortion sounds like fuzz. I tried with a couple of guitars and cables to rule that out but same across the board...
  38. F

    Recommendations for a Drum Machine Pedal

    Loving the AX8 so far. Any of you use a drum machine pedal to with the AX8? If yes, which one do you recommend? Also, how do you make the AX8 looper work with the drum pedal? Thanks!
  39. F

    New AX8 Doesn't Include Power Cable?

    Actually it does, though not for a lifetime and no free air fresheners (not that I know of). Mine came with 3 years of free gas and maintenance. Although I am sure they would have thrown in the air freshener had I asked for it but i dont like those.
  40. F

    New AX8 Doesn't Include Power Cable?

    There wasn't that much time spent on this thread by anyone until you came in and wrote two paragraphs making such a big deal when the OP is simply asking the question and the short answer (like everyone else's) would have been 'Yes'. Now we know why we have those 30 page threads on TGP as you...
  41. F

    Q10 Firmware for the AX8?

    That's funny cos I have a friend who asked me the same yesterday :D
  42. F

    Just joined the FAS Family

    Thanks all!
  43. F

    Just joined the FAS Family

    Have had various modelers over the years but just got my first from the FAS family, the AX8. Only've had it for a couple of days but loving it so far...looking forward to learning more from you guys and sharing my experiences...cheers!
Back
Top Bottom