Search results for query: *

  1. T

    4CM - Getting Levels Correct

    Yea dude with a super clean amp you wouldn’t tel the difference so much with delays and things It’s all up to you man there is not much on these methods but there the ones that make all the difference
  2. T

    4CM - Getting Levels Correct

    Press utility on the front panel of your axe fx Press page right a few times and you will see a output level page and then a page called vu meter The input output page is what I was referring to it shows what’s happening with your signal And I was backwards on accident what you want to do...
  3. T

    4CM - Getting Levels Correct

    Use the output metered in the utility page that’s the only way to see unity gain happen If you see in2L is really high but output 2L is low then use the fxloop block level To raise it To match but you also have to consider that having input 2 set too high will color your tone and slightly...
  4. T

    4CM - Getting Levels Correct

    Try out put nobs at 50 % you could be clipping your amps input or power amp
  5. T

    4CM - Getting Levels Correct

    First run it in your fx loop using tha fx loop side of the 4 cable and plug straight in the amp look at the input out put meters on the utility page you want your output to match what your preamps inputting When you have those levels at unity you should have the same tone as your amp plugged...
  6. T

    Did anyone else catch something really cool stated in this Axe-Fx III post?

    It’s the epiphany of the preamp modeling that should get ported and I think that’s what he was going to port the skull crusher came after but the epiphany is what you want the skullcrusher can’t work without the epiphany
  7. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    A stereo setup can be beautiful you can have a Mesa and a diezel right and left It’s not about how easy it is it’s about what you want as a player
  8. T

    5 Minute Tones

    A 1959 plexi and a vox with matching cabs and the tone bender fuzz on one or both I’ve been playing around with this rig setup to get the sound of Led Zeppelin’s celebration day concert
  9. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    There’s no shame in wanting updates in your axe fx 2 if it can take them
  10. T

    Wish Matching cab suggestion

    Either way it’s still defaults to a cab you are going to have to change from anyways so it may as well default to the amps cab
  11. T

    Wish Matching cab suggestion

    Same thing goes for the second amp and cab If you have two amp blocks going to one cab then you don’t get any special treatment it just cab one listens to amp 1
  12. T

    Single and humbucker

    Just dial in the amp properly and authenticity snd use the right cab block and every pickup choice on your guitar should sound good and like the real amp would
  13. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    Yea I saw those it doesn’t say that external data memory is full
  14. T

    Wish Matching cab suggestion

    It could potentially be easy to implement If you go pull up an a 1959 slp when you drop your cab block on the grid it will see what amp you have and default itself to the matching cab and if you want a different one you just scroll from that point Like instead of the cab block defaulting to...
  15. T

    Wish Does anyone care what's on the screen during a performance?

    I like the recal page of the axe 2 is the 3 diffrent
  16. T

    Friedman 2018 models... are they BE or HBE?

    I think there the be
  17. T

    Friedman 2018 models... are they BE or HBE?

    It says on each one if it says v1 it means be voice switch engaged in the 1st position Then there hbe v1 and 2 And hbe c45 is the hbe channel with the ce45 switch engaged The real amp has 2 gain channels be and hbe it has some voicing switch and a bright switch and a saturation switch on the...
  18. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    That was never said it was code memory The amp memory is different
  19. T

    Did anyone else catch something really cool stated in this Axe-Fx III post?

    Yea he found something he can port otherwise he wouldn’t of said he was supposed to work on it It’s updated preamp modeling so it would probably use what’s already there therefore not adding to much to the code memory Thanks for sharing that old post tho and I hope me being happy that we can...
  20. T

    Did anyone else catch something really cool stated in this Axe-Fx III post?

    No one really knows except the man himself If he has an epiphany then things could change if the epiphany is something that he feels could make things better we usually get it
  21. T

    Axe-Fx III Firmware Version 4.00 Beta

    It’s beautiful and porting it to the 2 would be beautiful I can’t wait to try your favorite firmware and feel like the first day I got my axe fx
  22. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    I don’t think it would be the last one I think we might get the drive improvements and the authentic controls We need to go deep into meditation and create good energies and receive quality
  23. T

    Axe-Fx III Firmware Version 3.02

    Chris I got a free amp and cab from carvin and I also got the tc electronic g system signed by korn for free Things in life do come for free And if I give something for free to someone they don’t have to live the rest of there life on there knees because of it
  24. T

    Authentic amp controls - amazing

    It would be really cool if the delays were made authentic Most people don’t know that the delux mind guy has chorus and vibrato or how to use the modifiers accurately on the 2290 delay
  25. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    O and so do you and Unix guy People message me on here afraid to post about good stuff because of you couple of nay sayers :) lighten up
  26. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    I wasn’t being irritating look at that comment by yek I did nothing to justify that kind of negativity he needs to get banned
  27. T

    Axe-Fx III Firmware Version 3.02

    You paid for the updates when you bought it
  28. T

    AF2 Ares amp block gain?

    That thin sound is what ams sound like when there dialed in for cuting in the mix it is more authentic of a tone the old muffled bass response and tin high end got dialed out
  29. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    I al Don’t take it to seriously I didn’t mean to be rude
  30. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    Yea yea we get it your triggered
  31. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    Add authentic controls ?:,0
  32. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    What’s the post say
  33. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    The number of the firmware dosnt mater If some one says hey nice tone and you say o thanks it’s firmaware beta ares 1.0 then there going to loose interest and feel like it’s flying over there head or they will think you said ass effects after a 4 hour loud concert lol
  34. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    I rather have the authentic controls implemented
  35. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    I had the volume on the tele all the way up if you turn it down just a little it cleans up in a good way and sounds like the srv rig
  36. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    Well it’s meant to show the tone of the new update not be an exact replica I just set it up how I liked it with out looking at his settings
  37. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    I’m not trying to play like him It’s just the amp he used
  38. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    Srv style tone with the vibrato verb and a tube screamer and speaker compliance at 8.8% and speaker compression at 4.5 bass at 1 and treble at 4.50 With factory cab #181
  39. T

    Periphery Clean Tone!!

    Bring down the bass to 3 mids to 6 and treble to 8 presence to 6 or set to taste bring down the input trim to taste
  40. T

    Periphery Clean Tone!!

    Use the shiver clean
  41. T

    Speaker compliance

    I’ve been using the vox ac 30 hot and normal and I find that higher levels of speaker compliance add something good to the tone I have it on 22% I also have the saturation drive on authentic and set to 5 I feel like it adds a beautiful flavor to every amp block I would love to know more about...
  42. T

    Axe-Fx II "Ares" Rev 1.00 Firmware Release

    We need this stuff the most :,(
  43. T

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    There are some that feel like they got clapped when they bought the axe 2 and 3 months latter the 3 came out :,0
  44. T

    Goal at the moment is to use finger style

    You probably would prefer a real amp for that as the axe has a wall that takes the dynamics out of supper light picking Try my preset of axe change the most dynamic patch ever
  45. T

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    I think we might get it it would be amazing and helpful to most axe fx users
  46. T

    Axe-Fx III Firmware Version 3.02 Public Beta #2

    It’s going to be more authentic for people that need to create authentic tones and fans of the real amp equivalents
  47. T

    Ask Stevie Vai if we can have one of his effects only patches

    it would be cool if some artist patches started coming out for the 2 now that the 3 is out Or if Steve’s effects where a factory patch on the 3 In the synergy amp interview his delay sounds really good and has one exact repeat with almost no wet delay sound I get very close but just don’t get...
  48. T

    New AX8 firmware update?

    You don’t know what’s in store man things are going to happen
  49. T

    New AX8 firmware update?

    You pulled lots out of your a$$ when I was asking for the 2 to be updated and pretty much everything you said was for no reason and the opposite is what happened There’s no point in theoretical defense of a production idea that you have no envolvment in the best thing for everyone who doesn’t...
  50. T

    Bug? Modulation effect on palm mutes and decay

    If you have the new beta firmware for the axe two load up those amps and listen to them
  51. T

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    I actually it’s just my right hand doing that
  52. T

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    There’s no gate it’s just an affect from my I phone that happened on the low end
  53. T

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    Was the threshold record always on the looper ?
  54. T

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    Cool I wasn’t sure if that mic was out back then
  55. T

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    Thanks man I bassed it of a Led Zeppelin live video it’s just a cell phone recording in person it sounds a little better In the video I can see one of jimi pages cabs miced with what looks like an m160 mic but I wish I new what it was
  56. T

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    Ares 1.0 jimi page live tone with the 1959 plexi and ml pre rolla 55 factory cab
  57. T

    Amp XY/preset change fade-in: unnecessarily long?

    You need to make a preset specificity for your switching needs What are you runing in your preset what amps are you switching between
  58. T

    Bug? Modulation effect on palm mutes and decay

    It’s on the new firmware on those amps
  59. T

    Bug? Modulation effect on palm mutes and decay

    I have it turned off almost always
  60. T

    Bug? Modulation effect on palm mutes and decay

    on dweezls b man I noticed some modulation sounds going on in the distortion And on the herbie channel 3 It seems to happen more on palm mutes and sounds kind of like a gate closing
  61. T

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    What amp were you using?
  62. T

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    I hear a moudulation like affect on the decay of the dweezils bassman and that same effect on the herbie Ch3 But everything sounds and feels great and it’s an amazing update we can help to make it perfect
  63. T

    Reducing scene change time

    If you change delay and chourus settings it’s only going to ad too the gap to make a perfectly seamless gap you need two amps that are relative and you can even adjust advanced parameters to match on each amp like pre and power amp bias and hardness and everything just tweak until your gap is...
  64. T

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    Thanks man and I’m sorry you have to work just to here that people want some other special firmware made to suit there needs The amp modeling is completely improved I’m verry happy with it
  65. T

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    Thank you fractal everything sounds way more dynamic and there is a different picking dynamic threshold then before it feels way better I was playing dweezlis bassman right now and the amp tone sounds really good but on the decay I can here a weird modulation like effect
  66. T

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    I’ve made some seem less transitioning presets before It just takes some tweaking and two amps that have similarities I used to use the energyball and the gibtone scout for clean
  67. T

    Axe-Fx II Firmware "Ares" 1.00 Public Beta

    Try using presets that are right next to each other with the same layout I
  68. T

    Axe-Fx II "Quantum" Rev 10.01 Firmware Release

    Yea I agree I want everything that has to do with the new amp modeling I don’t really think of the input output on each block or the spectrum analyzer The new reverbs would be a huge bonus but if we got just improved modeling that would be great
  69. T

    Are these Axe-Fx 2 hardware limitations?

    No one owes anyone anything man
  70. T

    Are these Axe-Fx 2 hardware limitations?

    No dude it hasn’t been done yet But I’m not disagreeing with you thanks for your input
  71. T

    Are these Axe-Fx 2 hardware limitations?

    Yea well why would you be frank when you could be Jesus and make miracles happen And turn water into wine And turn the axe fx 2 into a lite version of the 3 with the same modeling
  72. T

    Are these Axe-Fx 2 hardware limitations?

    I never referred to them in any way
  73. T

    Are these Axe-Fx 2 hardware limitations?

    I’m a badass
  74. T

    Are these Axe-Fx 2 hardware limitations?

    Yay
  75. T

    Are these Axe-Fx 2 hardware limitations?

    There’s a metal band I saw and they where using ultras and they had incredible tone
  76. T

    Are these Axe-Fx 2 hardware limitations?

    You have a valid point all fractal gear is the top of the line in amp modeling and it should be that way for everyone of the products regardless of profit Profit is for greedy business men
  77. T

    Are these Axe-Fx 2 hardware limitations?

    No dude it wasn’t so thanks for your input I value your input
  78. T

    Are these Axe-Fx 2 hardware limitations?

    Thats where I’m coming from too I got mine just a year before this happened and that’s why I feel like it could’ve be equal at least the amp modeling none of the effects or analyzer Or input out put levels just equallity of the modeling Fractal was the first to make modeling that sounded...
  79. T

    Are these Axe-Fx 2 hardware limitations?

    I know you don’t man
  80. T

    Are these Axe-Fx 2 hardware limitations?

    You forgot to post the firmware and the release notes and download link
  81. T

    Are these Axe-Fx 2 hardware limitations?

    Mat b is the form master you guys and if you want something and he says it’s never going to happen then it’s never going to so you may as well not be yourself and have your own ideas anymore and also don’t suggest anything he doesn’t agree with without asking him first what he thinks
  82. T

    Are these Axe-Fx 2 hardware limitations?

    Soon
  83. T

    Are these Axe-Fx 2 hardware limitations?

    Do you understand I’m not being argumentative in any way or being inconsiderate of busines or trying to offend you or make you feel like you need to come in and protect anything I’m sorry for any pain I have caused you
  84. T

    Are these Axe-Fx 2 hardware limitations?

    How ever much it cost is what I would pay for it
  85. T

    Are these Axe-Fx 2 hardware limitations?

    It would be a matter of being the most badass modeler out in the whole world not just a financial matter
  86. T

    Are these Axe-Fx 2 hardware limitations?

    People will pay for it
  87. T

    Anyone Else Checking Regularly for a Post NAMM Fractal Announcement

    Sooooonerrrr
  88. T

    Reality check tonight

    You can easily have a cab on stage and an amazing foh sound either the axe 8 or axe 2 Using one amp block The sounds can be almost identical Just make an ir of your own and you’ll be having your own stage sound that no one else can just copy the axe fx has no rules or limitations except thee...
  89. T

    Axe-Fx III Firmware Version 3.00 Beta

    On lenon Todd’s video it sounded exactly like the real amp
  90. T

    Anyone Else Checking Regularly for a Post NAMM Fractal Announcement

    I check everyday almost for an update for the 2
  91. T

    Spaceman Titan II Fuzz Machine Settings?

    I figured out the other day that if you put a small envelope filter modifier on the drive of a fuzz block you can get more dynamic feel from the fuzz and it is instantly more satisfying Set the max at where you would usually have the drive and set the min like -3 from that but you can...
  92. T

    Reality check tonight

    Don’t have peer amp modeling turned on Create your own ir plug out put 2 into your amps Fx loop and make a mic only ir and you’ll have your power amp in the ir it works really well you can make your foh and cab soud identicle this way I have a preset on axe change under tpj33 called 5150blue...
  93. T

    Reality check tonight

    Do you have power amp modeling bypassed
  94. T

    Reality check tonight

    Set up your patch at live volume chose the amp model that has the best gain structure for your playing and turn the input trim down slightly listen to how it sounds and where it sounds the best do the same with the master volume if its a mv amp model There’s also a control called supply sag...
  95. T

    [SOLVED] How can i get a more dynamic feel?

    Some of the top artists in the world would say the same thing I said so I don’t know what your ranting on about I have been talking about tone and helping people get dynamics
  96. T

    [SOLVED] How can i get a more dynamic feel?

    That guy was being critical of my tip that actualy works And there’s people out there that are afraid to turn every nob And get results and he could be one of them since he just basically tried to say I don’t know what I’m talking about I just said that to troll back harder it was a joke it was...
  97. T

    [SOLVED] How can i get a more dynamic feel?

    If people got offended by that simple statement that is them being argumentative I was fine I wasn’t mad or anything I can’t control how people are so defensive of everything on this form everyone knows it’s true there are people here that just want to argue and be weird for nothing I call them...
  98. T

    [SOLVED] How can i get a more dynamic feel?

    There was never an argument
  99. T

    Wish Wish List: New Amps

    It never fully disables it I thought?
  100. T

    Wish Wish List: New Amps

    The Friedman butterslax And the jj And some dedicated preamp models with no power amp modeling To run into tube power amps
Back
Top Bottom