Search results for query: *

  1. LuizPauloDT

    Axe-Fx II "Ares" Rev 2.00 Firmware Release

    wow, epic! thanks!
  2. LuizPauloDT

    hej (:

    hej (:
  3. LuizPauloDT

    Axe-Fx Ultra in 2017

    wow! I used this technique yesterday with some of my preamps (TriAxis, ENGL E580) and I'm mind blown! Great tips! This should be on the Axe FX Wiki page or in another topic with a more appropriate title so people could find it! :)
  4. LuizPauloDT

    Musicman Majesty, good?

    Mayones
  5. LuizPauloDT

    keep rockin'

    keep rockin'
  6. LuizPauloDT

    Musicman Majesty, good?

    I dont have, but played a couple ones. No doubt they are great guitars. Expensive, but high quality. Their playability is freaking awesome IMO. I think their price in US in quite okay for what you pay. If buying new in Europe they are pretty expensive and you can buy just as good stuff from...
  7. LuizPauloDT

    MESA/Boogie Mark IV - Amplitube 3 vs Axe-Fx II

    The first one has the mid range much more scooped, less bright and looser bass. Both sound good IMO. The first one sounds more PetrucciISH to me.
  8. LuizPauloDT

    Phasing issues in parallel fx loop

    I also would recommend you to take some time and read this white paper wrote by Laird Williams. There you can find some good info and best practices about troubleshooting unwanted noise in audio connections like buzz, hum, hiss, phase issues, etc Cheers, Luiz
  9. LuizPauloDT

    Mesa Boogie Roadster with Mesa 4x12 Traditional Cab

    And I tought I was the only one building towers of power! Great tone BTW :encouragement:
  10. LuizPauloDT

    Pushing Air vs Speaker Monitors

    I don't think it would sound the same. I played with my Axe straight to huge FRFR monitors once (stereo setup) and it sounded freaking awesome but definitely different than traditional power amp + cab. I love my Axe as much as I love my tube amps and cab and I would not give up from any of them...
  11. LuizPauloDT

    How many of you use REAL cabs still?

    I use it both ways. I use the FX Loop before the cab block in my presets to send the signal without the IR processing to my tube power amp and my cab. The IR processed signal goes straight to the mixer for recording, FOH, etc. Sometimes I catch me wondering if it was good to have a stereo...
  12. LuizPauloDT

    Why can't 'amp in the room' feel be modelled?

    It's not a matter of digital modeling. If you mic your guitar cab driven by your beloved tube amp and listen to it through FRFR speakers, its gonna sound the same or worse (because of MICing technique, expensive equipment needed, acoustic treatment, etc) than plugging your axe straight to a FRFR...
  13. LuizPauloDT

    Volume Spike/Drop issue

    I had this issue with my Axe Fx Mark II before. Just a background of the issue i had: I was using my Axe connected to my PC (Win 7) through USB and I also had one Scarlett 2i4 connected too. The volume changes where coming from the monitors out of the scarlett. I think that for some reason...
  14. LuizPauloDT

    USA Pre Lead II Red - Erotomania Tone Matched

    Hey man, that's weird. I'm using FW 19 beta 1, but I think the main changes between them was the amount of G3ed drive pedals and some other minor corrections. Also, scene one does not use pedal at all, so we should not expect changes between them. Are you using active pickups?
  15. LuizPauloDT

    USA Pre Lead II Red - Erotomania Tone Matched

    Not to open a new thread, using the same amp model, but tone matched Dream Theater's Pull Me Under song and other adjustments: Axe-Change - Download Preset - LPDT Pull Me Under TM - by LuizPauloDT Also, make sure you have this NULL IR into the cab block: Axe-Change - Download Other - NULL-IR -...
  16. LuizPauloDT

    USA Pre Lead II Red - Erotomania Tone Matched

    My first ever upload to Fractal Exchange I hope you guys enjoy the preset! Download and more details on the following link: Axe-Change - Download Preset - A Mind Beside Itself - by LuizPauloDT EDIT: Don't forget to use the NULL IR into the cab block (flat IR to use only the preamp...
  17. LuizPauloDT

    Engl e530 using 4CM?

    I think you'll succeed using the E530. I have a Triaxis 4CMed with an Axe FX II MKII. Indeed the TA ia a bit noisy. When I use tons of gain I put a noise gate after the fx loop acting like an ISP decimator and the noise is gone. Out of the Box I prefer the TA tones, but I did split the rack...
  18. LuizPauloDT

    Mark IIc+ Test Clip

    I've tried the 18.08 IIC+ yesterday and you're right. It does have that high end when pushing the upper highs and increasing the presence. I like it (:
  19. LuizPauloDT

    Mark IIc+ Test Clip

    I felt the same.
  20. LuizPauloDT

    18.03 USB RETURN LEVEL -60 [FIXED]

    Hej guys, I noticed an issue regarding volume changes. The volume coming out of the axe is floating from low to high levels randomly. My USB Return config is set to zero. Anyone with this issue also? Thx
  21. LuizPauloDT

    ToneClone - John Petrucci #1 (fw17.00 + Cab Pack 7)

    Exactly, and I'd like to add that not only the guitar pickups but the whole guitar itself. (geometry, wood type, construction, etc) I can feel some good differences between my JP guitars (JPM100 / JP6 / JP13) IMO the JPM and the JP6 have pretty much the same sound and feel, except that JPMs...
  22. LuizPauloDT

    FAS Modern III?

    This bad boy became one of my favorites for sure!
  23. LuizPauloDT

    High gain amps sound flubby and muddy

    Try to mess around with another IRs. Choosing the correct one seems to be the key for great high gain tones
  24. LuizPauloDT

    Help setting up axefx 2 with pro tools for reamping

    If you play anything else like a song on iTunes or any other thing, does the axe process it? Sent from my iPhone using Tapatalk
  25. LuizPauloDT

    Help setting up axefx 2 with pro tools for reamping

    If your track is stereo than it shall have an option 3+4 stereo or if it is mono you shall set it 3 or 4. To get the signal back to the axe FX you have to chane in I/O settings the input to USB. so, any sounds coming from your computer will get into the axe and reamped Sent from my iPhone...
  26. LuizPauloDT

    Help setting up axefx 2 with pro tools for reamping

    It's pretty easy! Through USB, axe FX outputs 3 and 4 sends the dry signal for reamping. Just set this tracks as input on pro tools tracks then record. To reamp, in axe FX I/O menu, change the input to USB and your done! Just playback your track, real time tweak, record, etc. Cheers Sent...
  27. LuizPauloDT

    Behind The Veil Tone Matched

    Nice tone! Did you double tracked or used the enhancer block? Sent from my iPhone using Tapatalk
  28. LuizPauloDT

    Change scenes without having to use Reveal button

    If I'm not wrong, if you switch to bank size of zero, you should have the 5 lower IA available, which in axe FX mode are configured for scene changes. To change presets, just hit up or down right lower switches and you are good to go. Sent from my iPhone using Tapatalk
  29. LuizPauloDT

    Mark V Question

    I own a Mark V for about 2 years and I'm still discovering a lot of different tones every time I plug my guitar in. I mainly use channel 1 Clean, channel 2 Mark I and channel 3 Mark IV modes. For each of these modes the are several possible combinations of different tones and feel. Imagine the...
  30. LuizPauloDT

    Practicality Vs. Potential: Is Someone Ready for Axe-FX II?

    I had a Axe FX standard in the past and I remember having some serious problems to get some nice tones out of it. When i had it, I had few not to saying no tube amps experience nor playing technique. Time passed by, I sold the standard and bought a Mark V. After using the Mark V for almost 2...
  31. LuizPauloDT

    Best way to improve headphone tone

    Sometimes I use a BeyerDynamic DT880 Pro and I think it sounds awesome. I can't even imagine how it would be if it sounded even better.
  32. LuizPauloDT

    which cable?

    I have the same setup and use this one. Ethercon at both ends. Rock solid. http://btpa.com/FAS11-XX.html
  33. LuizPauloDT

    Need advice on 7 String guitar.

    Unfortunately I've never played a 7321 to tell their differences.
  34. LuizPauloDT

    Need advice on 7 String guitar.

    Grab a second hand In good condition RG1527 and put some Dimarzios on it and you are good to go. I've one with CL LF and it's a great combination for a good price.
  35. LuizPauloDT

    four cable method issue

    FX loop block output level? FX loop send level knob of your combo amp (if there's one)?
  36. LuizPauloDT

    Home Studio build

    Awesome, congrats! I'm more than half way of building up mine and can't wait for it to be ready! Sent from my iPhone using Tapatalk
  37. LuizPauloDT

    Muse Hysteria cover!! Check it out!

    Cool! Great job! I liked the drums double bass pedal Sent from my iPhone using Tapatalk
  38. LuizPauloDT

    Monitor sizes

    I've had some KRK RP8 and they sound awesome, but I thought they had too much low end. Now I have a pair of Yamaha HS5 and I've never been so happy. Awesome speaker and not so big. For small rooms if suggest you I get some 5' or 6' sized ones Sent from my iPhone using Tapatalk
  39. LuizPauloDT

    Back to a tube power amp / review about real speakers and power amps with the Axe II

    Back to a tube power amp / review about real speakers and power amps with the... Cool topic. I have tried the following setups already: - AXE FX STANDARD + Rockit RP8 FRFR - AXE FX STANDARD (Power amp sim on) + Matrix GT 800FX + Orange PPC212 Cabinet - AXE FX II + Yamaha HS5 FRFR - AXE FX II...
  40. LuizPauloDT

    I FINALLY NAILED JOHN PETRUCCI'S TONE!!! Cover of The Bigger Picture

    Great job dude! But I think the song tone is fatter, brighter and with more high end content. Nothing that a few tweeks can't do the job. I would suggest you to use the TheOne IR that freman uses instead of the JP V30 mix one. I'm loving that for high gain stuff. Cheers Sent from my iPhone...
  41. LuizPauloDT

    FW13.02 DAS Metall HeaVy CRAP!!!!!

    Nice dude! Heavy as fuck! Sent from my iPhone using Tapatalk
  42. LuizPauloDT

    Axe fx ultra, soundcard and midi pedalboard

    Maybe what you are looking is this http://wiki.fractalaudio.com/index.php?title=Tutorials Go down the page to the Getting the MFC-101 and AxeEdit working together Im using the first method and it works great. Cheers Sent from my iPad using Tapatalk HD
Back
Top Bottom