Search results for query: *

  1. J

    FM9 Firmware Version 11.0

    same here soft reset don't do anything with AC20 EF86 for Tube Hardness, I have to change manually, or change amp and reselect it to have change . Same for speaker drive. This bug has been corrected for axe fx III. @FractalAudio ?
  2. J

    Axe-Fx III Firmware 31.01 Release

    It happened with an older version. What version of fw do you come from? Not fw 30 I think
  3. J

    Axe-Fx III Firmware 31.01 Release

    hello which cab(s) do you use with the band commander ? What is your Favorite setting ? Thanks
  4. J

    Axe-Fx III Firmware 31.01 Release

    I think there's nothing to worry about. Each time this kind of detail appeared, a correction was put online very quickly. This FW is great. It should also be noted that it is rare to have a brand with so many updates and with such an impressive evolution, and in addition free! The best...
  5. J

    Axe-Fx III Firmware 31.01 Release

    Thank you for your quick response! I have indeed noted that the hardness tube values are very different on the amps I use compared to the previous FW, but, apart from EC-20, the changes are not audible. Band commander: 8.4 to 2.6 EC-20 EF86: 7.4 to 3.75 Plexi 100w 1970: 7.3 to 2.2 Thanks again
  6. J

    Axe-Fx III Firmware 31.01 Release

    I agree with that, having the habit because it's been many years since I switched to the fractal world. But this change is radical, hence my question. No other variables, as specified above, I just notice that the value of "tube hardness" is very different, and therefore the sound changes...
  7. J

    Axe-Fx III Firmware 31.01 Release

    Yes, it's not stupid! I just checked, no it's ok. I reinstalled the firmware in case of doubt, but the same. I compared with my FM9, and the only difference I find is in the "preamp" section. Tube hardness at 3.75. It's at 7.4 on my FM9. Indeed, I get closer to my sound by modifying it to the...
  8. J

    Axe-Fx III Firmware 31.01 Release

    Hello , I use the AC-20 EF86 Treble a lot. With this firmware, the sound is very thin, less powerful, no bass, less drive. Until now, I used it with the FW 31.00 and it was very good. I also have an FM9 (FW 10.00) with my settings. I was able to compare the 2, the difference is obvious. I...
  9. J

    Modifiers per scene

    not possible with control switch , with "scenes controllers" but octave will be load with scene change. This is a wish I have too.
  10. J

    can I make a block independent from the output volume?

    Here's how I do it. I made myself a box with 2 rotary knobs that I can control with my foot. It is also possible to add an Eq before the "In2" to equalize the aux, but I removed it because I do it directly on the return console. Possible to also add an enhancer
  11. J

    FM9 Firmware Version 9.01

    In fact, it is on the screen of the unit that I have latency, even without being connected to FM9-EDIT.
  12. J

    FM9 Firmware Version 9.01

    Thank you for the time you give me. I have redo other tests, and indeed, the latency is more visual than auditory. I mean by this that the auditory delay between 2 preset changes is almost minimal (0 latency between scene changes), it's just that the FM9 screen displays the presets with a...
  13. J

    FM9 Firmware Version 9.01

    Thank you for your quick feedback. I know how to lighten my presets, it's not the problem. I just wonder if with the previous firmware I could and not with this one. For my use, 70% CPU, it curbs me a lot. I have the latest versions of FW installed on my FM3 and AXE FX III with an 80% CPU and...
  14. J

    FM9 Firmware Version 9.01

    I had indeed had this problem with the FW 9.0 beta 2, and it was indeed this solution that solved my problem. I no longer had this latency problem. It's really with the FW 9.01 that I can't work with a CPU that is too loaded
  15. J

    FM9 Firmware Version 9.01

    I had already had this problem, but it's not that. My presets are already saved with this firmware. In case of doubt, I even reinstalled the firmware, deleted my system preferences and started from scratch but without success then with my backups. The "problem" is with the CPU when it is...
  16. J

    FM9 Firmware Version 9.01

    Good evening, I notice that with this firmware, after several tests, that if the CPU is above 70%, I have a latency between changing the presets. Whether with my AXE FX III, my FM3 or my FM9, I have presets quite loaded in CPU, but I always manage not to exceed 78/80% and I have no worries. I...
  17. J

    4 Button Midi switch and FM9

    there are NOT rings around the switches that light up, But it works very well to change the scenes
  18. J

    FM9 Firmware Version 9.0 public beta (2)

    Yes I re-save, and all is ok now Thanks a lot
  19. J

    FM9 Firmware Version 9.0 public beta (2)

    Thank you very much, I just had to re-save my presets. I didn't know, I learned something again Everything works well Thanks
  20. J

    FM9 Firmware Version 9.0 public beta (2)

    I didn't resave my presets, just give it a try. Indeed, my presets had a yellow box. As gapless is essential for me, I went back. Does saving my presets affect the gapless? I didn't know, I just thought it was to specify that the firmware was not up to date on these presets, but I didn't know...
  21. J

    FM9 Firmware Version 9.0 public beta (2)

    preset changes I check only presets gapless
  22. J

    FM9 Firmware Version 9.0 public beta (2)

    Good morning, I just installed it, but the gapless no longer works. I tried to deactivate it and then reactivate it, same thing. I reinstalled the firmware, the same. I went back to the FW 9.0 beta 1, and it works again.
  23. J

    FM3 Firmware Version 9.02 public beta (3)

    no
  24. J

    FM3 Firmware Version 9.02 public beta (3)

    All is ok for me with 80% of use CPU in my presets
  25. J

    Axe-Fx III Firmware 27.01 Public Beta (Beta 2)

    Is it possible to send a tempo to the fx 3 with forscore ? When I change the partition, the tempo is sent to the fx 3 ?
  26. J

    Axe-Fx III Firmware 27.00 Release

    Hello, With my fx III , it all works very well. The problem may be elsewhere.
  27. J

    Let's see those FM3 rigs!

    I meant by that, how is it recognized as an expression pedal because the 4 switches are connected to the externals? I understood that it is powered by the faslink port, but how is it set up?
  28. J

    Let's see those FM3 rigs!

    Hello How do you do for. Ernie ball ?
  29. J

    FM3 Firmware Version 8.00

    I have the same problem. In fact, the general volume does not decrease, it is the opposite. It is stronger, and when it goes down, it returns to normal volume. I searched for a long time, to finally understand that it is the kill dry that has a problem. I first looked elsewhere because it...
  30. J

    Axe-Fx III Firmware 25.04 Release

    Thank you, it saved me the evening! I realized the problem during the sound check ... and as these switches are essential in my configuration, I was very annoyed! I deleted the hold functions to have access to the tap functions that are very important in my configuration. Without that, I...
  31. J

    FM9 clip from last night (first gig with Cygnus X-3!)

    great tone !! I would be curious to see your settings ;-)
  32. J

    IEM Mix Input

    No worries, I'm also learning ;-)
  33. J

    IEM Mix Input

    You're right, there's no point, it's the same thing. It would be even more "logical" before the Output1 block
  34. J

    IEM Mix Input

    I think it's not a bug, I have the same problem since several firmware versions. Surely something to improve
  35. J

    IEM Mix Input

    Hello, I do exactly the same thing. Yes it is possible to manage this globally. On my block mixer, I put externals controllers, which are controlled by 2 rotary knobs that I tinkered that are in my pedalboard. Thanks to this, when I modify my IEM/guitar mix, it applies it to all my presets...
  36. J

    Discussion en français !

    bonsoir je n'ai pas de soucis avec l'axe fx, je m'en sert depuis des années et je suis content de mes sons. Les réglages globaux sont les mêmes Faire l'inverse ,ax8 puis axe II, ne m'est pas trop utile car j'ai déjà mes sons de faits J'ai constaté que le fait déjà de ne pas utiliser la Reverb...
  37. J

    Discussion en français !

    Bonjour, Je ne sais pas si c'est arrivé à d'autres ... Je travaille sur Axe FX II depuis des années. J'ai pris un AX8 pour les projets plus compacts. J'ai le même firmware sur les 2, j'ai mis les mêmes réglages sur les deux, le même Cab etc... tout pareil . Le AX8 sonne plus "tight", plus...
  38. J

    Presets Axe fx II sur AX 8

    yes, AX8 don't have variable Input Impedance Global EQs are the same
  39. J

    Presets Axe fx II sur AX 8

    Bonjour, Je ne sais pas si c'est arrivé à d'autres ... Je travaille sur Axe FX II depuis des années. J'ai pris un AX8 pour les projets plus compacts. J'ai le même firmware sur les 2, j'ai mis les mêmes réglages sur les deux, le même Cab etc... tout pareil . Le AX8 sonne plus "tight", plus...
  40. J

    FRFR and a good solo sound...

    hello thanks a lot , but i'm with Q6.2 , and i can't load your presets . I'll try them when i update firmware . Thanks again
  41. J

    FRFR and a good solo sound...

    hello i like your sound . I can't reproduce it .... is it possible to share your preset ? thanks
  42. J

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Hello , - ok for the longpress , i understand - for the coma problem , it was right to specify it, I do not intend too of me to be useful about it with the phone - problem with bypass is random , and not very important . - for the intermittent blocks not movable , it is not that of which I am...
  43. J

    Software FracPad III - iOS/Android/Mac/Win Editor for the Axe-Fx II/XL/XL+, AX8/FX8, Axe-Fx III and FM3/FM9

    Salut , tout d'abord , ton appli est super !! Penses tu qu'il sera possible de pouvoir rentrer les valeurs avec un appui long par exemple , faire apparaitre l'onglet "set" , sans avoir à le faire avec 2 doigts (1 doigt pour sélectionner la valeur à changer , et un autre doigt pour cliquer sur...
  44. J

    Axe-Fx II "Quantum" Rev 5.03 Firmware Released

    oh sorry ... but yes , it will be great ;-)
  45. J

    Axe-Fx II "Quantum" Rev 5.03 Firmware Released

    hello how can we do that ? (with imac) thanks
  46. J

    Serious hiss

    which input ? the same "hiss" at input 1 (front) and 2 (rear) ? if only with input 1 (front) , open it , and disconnects and reconecte the pin from the mother board. I had the same problem if you are not sure of you, send it to fractal
  47. J

    tuner with In 2

    damage, that would be very useful for me
  48. J

    tuner with In 2

    ok thanks
  49. J

    tuner with In 2

    sorry , don't understand ... (i'm french) i suppose it's not possible
  50. J

    tuner with In 2

    hello I saw that tuner is only for In front , and in 1 Left (rear) But , do you have an easy way to make it function on In 2?
  51. J

    Axe-Fx II Firmware 19.00 Public Beta #2

    hello , on the drive , volumes are very strong, I am obliged to lower volume with 1 instead of 5 or 6 usually. You too?
  52. J

    restore system ?

    thanks for all ;-)
  53. J

    restore system ?

    yesss it is "Reset System Parameters" by itself on a different page ;-) then for what is used "Restore System" in a long list ?
  54. J

    restore system ?

    yes , in the utility menu
  55. J

    Which cab for doubleverb ??

    the choice of the cab is really not obvious for me
  56. J

    restore system ?

    hello , I'm on Axe FX XL the function "restore system" in utility mode don't do anything , and i don't have bar advance (like my Axe FX II before) I try : backup system - modify global Eq - restore system (for example) ... and global Eq is not restore . The same for other functions ...
  57. J

    Which cab for doubleverb ??

    for mic setting
  58. J

    Which cab for doubleverb ??

    thanks for your answer if i go "none" for cab block , the tone is very thin . could you share your patch that I see where I am mistaken in my adjustments, or to download my presets and to say to me what does not go thanks
  59. J

    Which cab for doubleverb ??

    And what about "mic" in cab block (none , null etc ...) ? what are your adjustments ? most of the time I select "null" , with low cut 80Hz and high cut 10000Hz
  60. J

    Which cab for doubleverb ??

    when i "Reset system params" , i don't have a bar of run . Is it normal ?
  61. J

    Which cab for doubleverb ??

    thanks Hellbat , i'm in left only in I/O i try re-installing the firmware . I'll try your cab too thanks a lot
  62. J

    Which cab for doubleverb ??

    I acknowledge that by test combinations, I do not understand anything any more
  63. J

    Which cab for doubleverb ??

    I try some other cab that you advise me . For the moment , the best result i have is with 2x12 Class-A Tom's Mix Right.syx here some patch (XL version) could you try it and tell me your opinion please
  64. J

    Which cab for doubleverb ??

    hello yek , i just try AC-20 DLX Treble with cab 135 (AC-20 DLX) . It is unusable in clean tone . It is crunch tone (also with input drive at 1 and master volume at 1) At your home , it is a clean tone ? Thanks for your help
  65. J

    Which cab for doubleverb ??

    Hello , thank you very much with all for your answers ;-) Semih Yanyali , i agree with you . It was diffucult at first , but i think i understand . Yek , I benefit from it to thank you for the sharing for your work I will test all your solutions . I know that the twin is a little...
  66. J

    Which cab for doubleverb ??

    Hello I need some help please . My clean tone is very "thin" , without "body". I use double verb patch with cab F137: double verb M160(UR) I tested others cab, but there is so much that I lose myself there I use IEM Earsonics , and tom anderson guitar ; on Axe FX XL Most of my...
  67. J

    problème reamping

    efx , I am curious to know your adjustments in axe fx, on the driver of the axe fx, and in asio4all. I thank you by advance
  68. J

    problème reamping

    Thanks efx , I understood well what you wrote, and the solution that you propose, but that does not function . I thank you much for having tried to help me
  69. J

    problème reamping

    merci pour vos réponses . Pour le réamp , pas de soucis , j'ai bien compris le truc . J'ai aussi ce lien dans mes favoris ;-) Merci julien
  70. J

    problème reamping

    Bonsoir , je me trouve confronté à un gros problème . Je suis en train d'enregistrer un album . J'enregistre toutes mes prises avec l'axe fx II comme carte son pour pouvoir faire du reamping sur les sons utilisés . Le problème que j'ai , c'est que j'enregistre également les autres pistes ...
Back
Top Bottom