Recent content by 1vl

  1. 1

    Ground Lift - Implementation in the Axe FX 3

    I wanted to put my regularly used axe inputs and outputs on a rack panel and was wondering how/if I could include the ground lift switches from outputs 1 and 2. If I understand/measure correctly, the switch switches off the signal ground on pin1 of the XLRs, so this can easily implemented on...
  2. 1

    Drive1 - bypass mode changed + hidden in Axe Edit +

    Thanks for the insight + your work, Michael! If I understand you correctly, the error appears in the editor, but the problem lies in the preset. And you are right: The preset backup form fw27 worked in fw28.2, but there are to many presets affected, I restored the whole backup. Now I'm...
  3. 1

    Bug? Axe-Fx III freeze

    This freezing problem has occurred to me several times now, with and without Axe Edit. I was browsing through the setlist using the FC-6, and sometimes the freezing was silent, but recently, without Axe Edit connected, there was a huge noise coming from the connected amplifier. It occurred with...
  4. 1

    Drive1 - bypass mode changed + hidden in Axe Edit +

    Thank you for classifying the problem! I've since discovered that the error doesn't occur if I reinstall an older backup of the preset I created under 27.03 and the previous version of Axe Edit. Maybe this will help narrow down the problem.
  5. 1

    Drive1 - bypass mode changed + hidden in Axe Edit +

    My current problem is that the bypass mode of Drive 1 changed automatically in some presets + it is not displayed in Axe Edit in these presets. The mode can be changed at the Device display or in Axe Edit by clicking blind... The space is simply empty, no "through" or "mute" is displayed. It...
  6. 1

    Axe-Fx III Firmware 28.02 Release

    Thank you for your ideas. editor was newest 14.12 all time. I did the RANF several times. But only one time after reinstalling fw 28.02. So I just turned all off and on again and did it again ... just to be sure... ALL THE DRIVES ARE WHERE THEY SHOULD BE! I don't know why... The device had to...
  7. 1

    Axe-Fx III Firmware 28.02 Release

    I had the same problem: For some presets, the output LEDs all lit up; I had to restart the Axe. In firmware 28.02, the drive types are sorted completely differently, and there are even empty drive types at the beginning. Has anybody seen this behaviour? Going back to firmware 27.03 solved the...
  8. 1

    Axe-Fx III Firmware 28.02 Release

    lp59, I loaded your preset and it worked fine turning the volume knob up a bit. But I had a similar experience... maybe this will shed some light... wait
  9. 1

    Use footswitch to increase or decrease output volume

    First (maybe not best?) idea that comes to my mind: Assign a volume block with different/increasing settings on several channels A = 0dB B = +2dB C = +4dB ... and use a button on the FC-6 for channel increment. A second block could be used for volume reduction (or maybe - and + values can be...
  10. 1

    Individual Factory Presets

    or you create the individual files yourself by loading a bank into the Axe and exporting them as individual *.syx using Axe Edit MangePresets.
  11. 1

    FracTool - for power users only

    Guess I'm a power user: 'Save to Axe FX III' was offered in the Save dialog...
  12. 1

    FracTool - for power users only

    When I converted my Gen 2 presets for the Ax Fx 3 with FracTool long ago, I was super happy: most things worked 1:1 straight away and Fractal didn't provide anything like that. My kudos to AlGrenadine! The presets I created this way worked well, but were no longer compatible with the...
  13. 1

    One Control Switch for latching and momentary

    Sorry, as a non-native speaker, I find it hard to express myself appropriately... So I'll try another way: Each button of the FC has 2 options: tap and hold. Instead of using 2 different functions, I programmed the same function (CS1) for both operating variants: Once as an on off switch and in...
  14. 1

    One Control Switch for latching and momentary

    No question, just my findings, which others may have already found out... I reserved a button for Control Switch 1 (latching) in my main layout. The hold function of that button is also CS1 (but momentary). Depending on my mood and need, I can use it to operate a special function in each...
  15. 1

    looping variable pitches

    It worked with some Pitch & Delay.
See more
Back
Top Bottom