NightWalker
Power User
i just get this pedal but i see the SP-1 have 2 outs,out 1 for the expression pedal and out 2 for the expression pedal switch,so my question how to connect the SP-1 to my AX8?
use TRS cables on both outputs.
I have one and connect the TRS cables to EXP 1 and EXP 2 on the AX8
You'll need to calibrate the pedal as well
cool man ,thank you,well i just need the cables for home use,for now im not playing live.yep, you'll need one for each output on the Mission pedal.
Not sure you'll need that much length, I think mine are about 18"
if you search on YouTube, you'll find a lot of great videos.
Mark Day did this one
You'll need to set the switch too.
but in that video he is using the MFC-101 and i dont have that unit.
this cable is ok? Hosa HSS-005 REAN 1/4 inch TRS Pro Balanced Interconnect Cable
Yes, you can use it as a wha only, but thru out 1. The out 1 controls the sweep motion (the pedal), the out 2 controls the switch.I have the Mission SP-1 and the AX8. My SP-1 has (2) OUTS. If I don't use OUT1 for volume on a particular patch; can I still use the OUT2 for wah?
I was wondering if I could use the OUT1 (sweeping motion) for wah instead of the switch by just programming it in a patch.Yes, you can use it as a wha only, but thru out 1. The out 1 controls the sweep motion (the pedal), the out 2 controls the switch.
That’s why you calibrate. The number won’t change. You’re telling the AX8 what the max number is.My Mission SP-1 only goes to 91 or something when I calibrate, can't remember if there was a fix for this..
Look up auto-engage in the manual. It’s in the Modifier menu.I was wondering if I could use the OUT1 (sweeping motion) for wah instead of the switch by just programming it in a patch.