I have a mission sp1 with the momentary switch. I've been using it for the last 6 months sans switch and just using the pedal out to the LFJR as wah in autoengage. James from mission told me I could use the same pedal for volume and wah and switch between them with the switch. he gave me instructions and I tried it but I couldn't get it working properly so I'm here for help.
in the LF editor I set up the global expression pedal settings for continuous on pedal 1 and latch on pedal 2. the cc#'s were set to values that I then setup in the axefx for external 2 and wah/pan bypasss respectively.
in the preset override in each preset I setup the same thing but did it for external 1 and wah1 bypass. the wah frequency is set to external 1 in the axefx and the volume block is set to external 2.
well the volume block now defaults to 0 (so i get no sound) and won't change with the pedal. if i click the switch, the volume block does not bypass, but the wah will now engage and the freq sweep functions. but remember the volume block is still on zero. when i click the switch again, the wah block bypasses but the volume still won't sweep. when you sweep the pedal with the wah block bypassed, the freq on the wah still sweeps though.
so for the gig last night in a quick fix i just removed the volume block from my 3 presets I use and the wah functioned like a normal wah with a toe switch, but the point of this excercise is that I want a volume pedal in the same pedal like I used to have with my gt10.
so i hope that's enough information if anyone can help. thanks!
N
in the LF editor I set up the global expression pedal settings for continuous on pedal 1 and latch on pedal 2. the cc#'s were set to values that I then setup in the axefx for external 2 and wah/pan bypasss respectively.
in the preset override in each preset I setup the same thing but did it for external 1 and wah1 bypass. the wah frequency is set to external 1 in the axefx and the volume block is set to external 2.
well the volume block now defaults to 0 (so i get no sound) and won't change with the pedal. if i click the switch, the volume block does not bypass, but the wah will now engage and the freq sweep functions. but remember the volume block is still on zero. when i click the switch again, the wah block bypasses but the volume still won't sweep. when you sweep the pedal with the wah block bypassed, the freq on the wah still sweeps though.
so for the gig last night in a quick fix i just removed the volume block from my 3 presets I use and the wah functioned like a normal wah with a toe switch, but the point of this excercise is that I want a volume pedal in the same pedal like I used to have with my gt10.
so i hope that's enough information if anyone can help. thanks!
N