Volume profile

[kavevester]

If I want a volume profile (Exp controlled) which goes 70% hi on the first 5% Exp movement it's impossible to setup using Start/Mid/End/Slope. Would be better to draw the profile. Can this be done in another way?

I dont need the full range of the vol but still want to shut it completely down and completely up but the way to 100% must be more slowly.

 

[GlennO]

No, you can't do that. But you can accomplish pretty much the same thing with auto-engage. Turn on auto-engage (position), then turn up start to 70 and mid to 85. Set bypass mode to Mute.

 

[Bakerman]

You could do that with two modifiers like this. If the on/off switching of autoengage sounds too abrupt, it might be worth trying this, possibly with damping turned up a bit on the "volume" modifier.

 

[kavevester]

No, you can't do that. But you can accomplish pretty much the same thing with auto-engage. Turn on auto-engage (position), then turn up start to 70 and mid to 85. Set bypass mode to Mute.

Thank's - that worked