Problem midi female - female ???

R

RUBIRAs

New Member
Hello I need your help please :roll:
Firstly sorry for my english...
My sound card is Presonus firebox, I want to connect spdif to Axe.
But the in and out (spdif and midi) are female and the Axe too.
Maybe the solution can be adaptors to male? :oops:
Thank you so much for your help.
 
Am I missing something here? What you need is cables to connect the two.
A normal MIDI cable has two male connectors so a female connector on either end is exactly what you need.
Same thing for S/PDIF
I fail to see what your problem is.
th_smiley8.gif
 
Pardon, I explained myself bad. " Midi and spdif IO can be connected to this DB-9 connector breakout cable.

db9_face_js.jpg
out of soundcard.

FIREBOX_DB-9_Breakout_Cable.png
The other end of the cable female just as the entrances of axe.

Connectors male conversion ??? Is the solution ??

Thanks. :oops:
 
Okay, I've lookd up the details on the firebox.
The firebox is quite small and there's no room for a couple of DIN and RCA connectors so they are on a breakout cable.
The intention of this cable is not to connect directly to an external device like the Axe-Fx.
It is only to provide the connectors that would have been on the back panel of the firebox if it had been larger.

Just use standard MIDI and S/PDIF cables to connect the two and you'll be fine.

If you have the firebox very close to the Axe-Fx you might be able to hook the S/PDIF connections up directly with something like this: http://www.thomann.de/gb/the_sssnake_1827_adapter.htm
I have not found anything similar for MIDI.

Something like this should do the trick though: http://www.thomann.de/gb/the_sssnake_sk366-03-blk_midi_kabel.htm
 
Thousand thanks for your time. :)

It is what thought. ;) Your information has been a gift for my.

Thanks again. :p

Good luck.
 
You must log in or register to reply here.
Back
Top Bottom