Wish Perform pages: indicator that parameter is in an active/inactive block

[yyz67]

Would love if parameters on both perform pages had an indicator if the parameter is active (global/not bypassed) or inactive (bypassed). I don't want to fiddle with the wrong amp parameter to no effect and then go to another scene which engages that block and get a surprise (or save it not knowing I changed from saved setting(s)).

Use case example (which already bit me):
Scene 1: AMP 1 is active but not AMP 2
Scene 2: AMP 2 is active but not AMP 1
Scene 3: Both amps are active

When in scene 1 and on a Perform page, if AMP 1 Input Drive was highlighted/boxed (or AMP 2 slightly grayed out) then we could know which parameters are active/inactive. Still want to be able to change "inactive" parameters as this still could be useful. Or maybe there could be a config to lock inactive params.

 

[Ugly Bunny]

Brilliant observation & suggestion - could just be faded out or something, like as if it's on the inactive row.

+1

 

[AlGrenadine]

Good idea

 

[Joe Bfstplk]

+1.

Perf mode is about getting at a few key settings quickly. Time not wasted twisting an inactive knob is time saved at the critical moment....